Miele Imperial DWA 956-2 EX Istruzioni per l'uso e l'installazione - Pagina 18

Sfoglia online o scarica il pdf Istruzioni per l'uso e l'installazione per Cappa di ventilazione Miele Imperial DWA 956-2 EX. Miele Imperial DWA 956-2 EX 37.

Stampa la pagina

Electrical connection

All electrical work should only be car-

ried out by a suitably qualified and com-

petent person in accordance with na-

tional and local safety regulations.

The cooker hood is supplied for con-

nection to a 220-230 V single phase

50 Hz supply.

The data plate gives the necessary

data for connection. This is visible

when the grease filter has been

removed.

Connection should be made either by a

double pole fused spur connection

unit, or a fused plug and a suitable

switched socket. The On-Off switch

should be easily accessible after the

appliance has been built in.

When switched off there must be an all-

pole contact gap of 3 mm in the switch

(including switch, fuses and relays ac-

cording to EN 60 335).

If the socket is not accessible after in-

stallation (depending on country) an ad-

ditional means of disconnection must

be provided for all poles.

For extra safety it is advisable to install

a residual current device (RCD) with a

trip current of 30 mA (in accordance

with DIN VDE 0664).

The wires in the mains lead are col-

oured in accordance with the following

code:

Green/yellow = earth

Blue

= neutral

Brown

= live.

If the appliance is to be connected via

a plug and socket, please note the fol-

lowing:

As the colours of the wires in the mains

lead of this appliance may not corre-

spond with the coloured markings ident-

ifying the terminals in your plug, pro-

ceed as follows:

The wire which is coloured green and

yellow must be connected to the termi-

nal in the plug which is marked with the

letter E or by the earth symbol z or

coloured green or green and yellow.

The wire which is coloured blue must

be connected to the terminal which is

marked with the letter N or coloured

black.

The wire which is coloured brown must

be connected to the terminal which is

marked with the letter L or coloured red.