ABB ACS880-01 Series Manuale di installazione rapida - Pagina 9

Sfoglia online o scarica il pdf Manuale di installazione rapida per Apparecchiature industriali ABB ACS880-01 Series. ABB ACS880-01 Series 14. Industrial drives
Anche per ABB ACS880-01 Series: Manuale di installazione (20 pagine), Manuale (16 pagine), Manuale di installazione e avviamento rapido (17 pagine), Manuale d'uso (18 pagine)

EN – Quick installation guide

This guide instructs briefly how to install the drive. For more detailed instructions,

engineering guide lines, technical data and complete safety instructions, see the

hardware manual (www.abb.com/drives: Select Document Library and search for

document number 3AUA0000078093 [English]).

Follow the safety instructions

WARNING! Ignoring the following instructions can cause physical injury or

death, or damage to the equipment:

•

Only qualified electricians are allowed to install and maintain the drive.

•

Never work on the drive, motor cable or motor when main power is applied.

After disconnecting the input power, always wait for 5 min to let the intermediate

circuit capacitors discharge before you start working on the drive, motor or

motor cable.

•

Do not work on the control cables when power is applied to the drive or to the

external control circuits.

•

Make sure that dust from borings and grindings does not enter the drive when

installing.

The floor material below the drive must be non-flammable.

Select the power cables

Size the power cables according to local regulations to carry the nominal current

given on the type designation label of your drive.

Ensure the cooling

See table

on page

allowed operating temperature range of the drive without derating is -15 to +40 °C.

Protect the drive and input power cable

See fuses manufactured by ABB in table

Install the drive on the wall

See figure

on page 3.

for the losses and the cooling air flow through the drive. The

EN – Quick installation guide 9

on page 3.

3AUA0000085966 Rev A