Alloy LED PrimaLine Neon 200 TB Istruzioni per l'installazione - Pagina 2
Sfoglia online o scarica il pdf Istruzioni per l'installazione per Apparecchiature di illuminazione Alloy LED PrimaLine Neon 200 TB. Alloy LED PrimaLine Neon 200 TB 5. 24v led tape light
Stampa la pagina®
®
NOTE: The images on pages 2-5 show PrimaLine Neon 100 SB. For PrimaLine Neon 200 TB, follow the same instructions, but
note that the tape light PCB inside of the silicone is rotated 90°, with the diodes pointed toward the diffuser.
CUTTING TAPE LIGHT
1. Cut the tape light to the desired length using the black indicator that can be seen on the side of the tape light
through the silicone casing. We recommend using a Multi-Angle Miter Hand Shear for a clean and precise cut.
Cut on Black Indicator
NOTE: Dark indicator can be seen through the silicone casing.
USING DIY CONNECTORS AND END CAPS
1. Connect the tape light to power using the DIY connectors. To
assemble the DIY connector:
a) Slide the rubber washer onto the prongs of the connector. Make sure to
align the rubber washer so it sits against the plastic protrusion on the
connector, without a gap.
b) Thread the plastic cover onto the PrimaLine Neon Tape Light where
the tape light will connect to power. Make sure that the grooves on the
inside the plastic cover are aligned with the indentations on the sides
of the tape light. (Continued on next page)
www.AlloyLED.com
page 2 of 5
Installation Instructions
Plastic Cover
Rubber Washer
Metal Clamp
|
Call: 800.910.LEDS [5337]
Specifications subject to change without notice.
NOTE: Avoid twisting or any harsh movement that may damage
the internal components.
Silicone Insert
PrimaLine Neon Tape Light
Silicone Insert
Metal Sleeve
|
Text: 510.400.6690
LED
IP65
Notches
Indentations
|
v1