Panasonic CT-26WX15UN Manuale di servizio - Pagina 9
Sfoglia online o scarica il pdf Manuale di servizio per TV Panasonic CT-26WX15UN. Panasonic CT-26WX15UN 31.
Stampa la pagina
NOTE
Some adjustments are available only in some modes (480i, 480p, 1080i); it is needed to apply the format. A 1080i, 480p, 480i pattern can be obtained from Panasonic's TU-DST51
set-top box DTV decoder.
Exiting the service mode:
This TV goes out from service mode when it is unplugged or turned OFF. To exit the service mode, turn the TV OFF or unplug the TV from A.C.
Other method
Press ACTION and POWER on the receiver simultaneously for at least 2 seconds.
The receiver momentarily shuts off; then comes back on tuned to channel 3 with a preset level of sound.
Any programmed channels, channels caption data and some others user defined settings will be erased when exited by pressing ACTION and POWER on receiver.
IMPORTANT NOTE
Always check that the TV exits the service mode.
To confirm colors
When in service mode (red "CHK" is displayed) press RECALL on the remote control to enter the purity field check mode
Entering service mode (open-back method)
While the receiver is connected and operating in normal mode, momentarily short test point
FA1 (A15 pin 2) to cold ground (A-Board).
The receiver enters the aging mode.
Yellow letters "CHK" appear in the upper left corner of the screen.
(The volume right/left and channel up/down will adjust rapidly).
12.1 Service adjustment default values for service items
REGISTER
DESCRIPTION
MTSIN
INPUT LEVEL
SEPAL
LOW LEVEL SEPARATION
SEPAH
HIGH LEVEL SEPARATION
CLOCK
CLOCK
COLOR
COLOR
TINT
TINT
BRIGH
SUB-BRIGHTNESS
CONT
SUB-CONTRAST
B-Y_G
MAGENTA TINT ADJ
http://tsn.pstc.panasonic.com/viewing/NA/CT-26WX15N/SIMP/MTNC050528A1/doc/M...
FORMAT
FULL JUST ZOOM
1D
N/A
N/A
08
N/A
N/A
1D
N/A
N/A
125
N/A
N/A
1F
N/A
N/A
7D
N/A
N/A
09 3E N/A
N/A
02 89 N/A
N/A
3D
N/A
N/A
Page 9 of 30
11/3/2008