AQUATHERMA Nature Series Manuale d'uso - Pagina 6

Sfoglia online o scarica il pdf Manuale d'uso per Vasca idromassaggio AQUATHERMA Nature Series. AQUATHERMA Nature Series 16.

COMPONENTS

Note that some components may be optional.

JETS

The flow of each jet can be controlled by turning it to the left (less

powerful/closed) or to the right (more powerful/open). The jets can also

be removed.

To do so, grab then turn the entire jet to the left; when completely left,

continue to apply tension to the left to disengage the screw mechanism to

which the jet is fitted to remain in place.

JET MAINTENANCE

We recommend cleaning the jets quarterly: remove the jets then place

them in a container filled with water containing a small amount of dish

soap. Roll the rotating nozzles in the soapy water solution and rinse

thoroughly.

SKIMMER

The skimmer is placed on the top of the spa wall. It is used to suck up

surface water and dirt to send them to the filtration system in the technical

unit.

Never stand directly in front of or leave any object obstructing its face.

Ensure that the water level is always at least half of the skimmer plastic

plate (ideally between the top half and top 2/3).

BOTTOM DRAINS

The drain(s) are placed on the bottom of the spa wall (calf height).

It is used to suck ground water and dirt to send them to the filtration

system in the technical block.

Never stand directly in front of or leave any object obstructing its face.

Be sure to regularly clean the face(s) of the drain(s) so as not to reduce

the flow of water entering it.

Spa Basin

Jet

Skimmer

Bottom drain