Aquatic AQ-DM-6UBT DIGITAL MEDIA LOCKER Manuale d'uso e installazione - Pagina 6

Sfoglia online o scarica il pdf Manuale d'uso e installazione per Attrezzatura marina Aquatic AQ-DM-6UBT DIGITAL MEDIA LOCKER. Aquatic AQ-DM-6UBT DIGITAL MEDIA LOCKER 20. Supports bluetooth audio, usb, mp3, wma and fm radio

Stampa la pagina

Getting Started

Digital Media Locker AQ-DM-6UBT

1.4. Mounting the Digital Media Locker™

1. A mounting template is included. Aquatic AV

26mm

65mm

recommends using the 'measure twice, cut once'

method.

2. Once the mounting hole is complete, make

sure the outside surface is clean and clear of

debris. The Digital Media Locker has an external

water/dust proof gasket, but this requires a clean

and flat surface for best performance.

3. The Digital Media Locker has six (6) front

screws. Drive the screws using a screw driver.

During final mounting, apply equal pressure

to all points for the best water/dust outer seal

performance. make sure screws are snug and do

not over tighten.

4. Review all outside surfaces of the Digital Me-

dia Locker to ensure proper water/dust seal. This

is important for long term environmental protec-

tion performance for your digital media device.

120mm

1.5 Bluetooth Antenna Installation

1. Screw on the provided Bluetooth Antenna,

avoiding bending the cable at a 90° angle.

2. Install the Bluetooth antenna as high as

possible, above the waterline of the spa if possible,

and making sure the arrow is pointing directly

upwards towards the sky to ensure the Bluetooth

range is maximized. If there is no suitable surface

to screw it in, we recommend using a good quality

double sided tape.