Axvue E662 Manuale di istruzioni - Pagina 2

Sfoglia online o scarica il pdf Manuale di istruzioni per Baby Monitor Axvue E662. Axvue E662 2. Video baby monitor with two way communication & temperature

Stampa la pagina

Setup & use (continued)

The SCAN, SELECT, ADD, DELETE, VIEW CAMERA menu options are used with addtional

cameras only. Order the extra camera by visiting us at http://www.koehog.com .

TO DELETE A CAMERA

VOX

TO SELECT A CAMERA

VOX

TO SCAN ALL CAMERAS (AUTO-SCAN)

The monitor can switch to each camera automatically if it was paired with 2 more cameras.

Step 1: Press Menu / OK

shortly to enter menu, then press Left button to highlight the camera

option function and press Menu / OK

to conﬁrm.

Step 2: Using the Left or Right button to highlight SCAN CAM

Step 3: Scanning cameras will start, cycling shows each camera for 8 seconds and the scan number will

show on the screen.

Step 4: Press the Power / Video

to exit the scan mode.

VOX

TO SET UP VOX - Video On Crying

When the monitor is working in power-saving screen oﬀ, the video may be triggered on if volume is

higher than a value, by turning on the VOX function. Enter the MENU, select camera option,

highlight the VOX, turn on this function by selecting sensitivity - "3" HIGH, "2" MEDIUM, "1" LOW.

VOX

Adjust To Preferred Color Temperature

Turn on the color temperature function and select the mode you want.

VOX

Favorite features

DIGITAL ZOOM

The zoom option enables you to get a closer view on screen. Press the Talk Back / Zoom

move the image on the monitor screen to 2x view, press again to return the normal view.

TWO-WAY COMMUNICATION

Your baby is always eager to your voice when crying. Press and hold the Talk Back / Zoom

monitor to activate two-way communication. Release the button to end the two-way communication mode.

NIGHT VISION

The infrared around the lens will light up automatically after you turn oﬀ the light in your room and

then it will enter the night vision mode. The image on the monitor screen is black and white when

the camera is in a low-light.

SOUND LIGHTS

The LED light bar on the top of the monitor will light up as it picks up voices. Softer sounds will light

up the green or amber LEDs. Louder noises will light up all the LEDs.

VOLUME CONTROL

Volume adjustments allow higher volume settings for parents who want to hear every little sound

from baby, like cooing, and lower volume settings to monitor louder sounds and crying from baby.

Easily adjust your desired volume level by pressing Volume up

ADJUSTING BRIGHTNESS

Press the Menu / OK

button and then choose the brightness option

button to enter it, and then press the Left

or Right

VIDEO ON/OFF

To preserve battery life when not plugged into AC Outlet, you can turn oﬀ the monitor's video by

pressing Power / Video

button, the screen will go dark. The audio and sound lights will still

remain activated allowing you to monitor sounds. Press the button again to resume Video

FAQ

NO PICTURE OR SOUND

-Make sure the camera and handheld monitor unit are paired .

-Make sure the camera and handheld monitor unit are both turned on.

-Make sure the AC adapters are plugged in.

-Make sure the outlets are working.

-Make sure the battery is charged before working in portable mode.

-Keep the camera and monitor away from WiFi router (more than 10 feet oﬀ ) .

SOUND BUT NO PICTURE

-Press the Power / Video

button once to turn on video mode.

-Check to make sure nothing is blocking the camera.

-Test reception by moving the monitor and / or camera to diﬀerent locations.

-Pair the camera and monitor again.

PICTURE BUT NO SOUND

-Power the monitor completely oﬀ, remove and re-insert the battery, then turn monitor back on.

-Turn up the volume using Volume Control.

-Make sure the camera and handheld monitor unit are paired.

Camera

Deleted

Selected camera will

appear on the screen

and press Menu / OK

to active.

All cameras can be

auto-scanned

to view on an 8-second

rotation.Press

stop at current camera.

Sound Lights

OFF

2 3

once to

button on the

or Volume Down

button.

and press the MENU / OK

button to adjust the brightness you want.

PICTURE NOT CLEAR

-Position the monitor closer to the camera, but not adjacent.

-Move the monitor away from other electronic devices, WiFi router, etc.

-Adjust the brightness using Brightness Control.

-Test reception by moving the monitor and / or camera to diﬀerent locations.

SQUEALING SOUND COMING FROM SPEAKER ON MONITOR

-Move the monitor and camera further away from each other.

-Turn the volume down using Volume Control.

-Power the monitor completely oﬀ, remove and re-insert the battery, then turn the monitor on

RISK OF ELECTRIC SHOCK

CAUTION

DO NOT OPEN

IMPORTANT SAFETY INSTRUCTIONS

-Read safety and operating instructions before the product is operated.

-Retain instructions for future reference.

-Heed warnings on the product and in the operating instructions.

-Follow instructions and operate properly.

-Clean it after unplugging this product from the wall outlet. And use a damp cloth for cleaning.

-Use product manufacturer recommended attachments to avoid possible hazards.

-Do not use this product near humid place, for example, bath tub, wash bowl, kitchen sink, laundry

tub, wet basement, swimming pool and the like.

-Ensure this product is installed securely on a stable cart, stand, tripod, bracket, or table. -Otherwise,

The falling product may cause serious injury to a child or adult, and serious damage to -the product.

-Use manufacturer recommended cart, stand, tripod, bracket, or table. Follow the manufacturer's

instructions strictly and use recommended mounting kits to mount the product.

-The slots and openings in the cabinet are provided for ventilation and to ensure reliable operation

of the product and to protect it from overheating, and keep these openings not blocked or covered.

-The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar

surfaces. This product should not be placed in a built-in installation such as a bookcase or rack

unless proper ventilation is provided or the manufacturer's instructions have been adhered to.

-This product should be operated only from the type of power source indicated on the marking

label. If you are not sure of the type of power supply to your home, consult your product dealer or

local power company. For products intended to operate from battery power, or other sources, refer

to the operating instructions.

-Power-supply cords should be routed so that they are not likely to be walked on or pinched by

items placed upon or against them, paying particular attention to cords at plugs, convenience

receptacles, and the point where they exit from the product.

-An outside antenna system should not be located in the vicinity of overhead power lines or other

electric light or power circuits, or where it can fall into such power lines or circuits. When installing

an outside antenna system, extreme care should be taken to keep from touching such power lines

or circuits as contact with them might be fatal.

-Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result

in a risk of ﬁre or electric shock.

-Never push objects of any kind into this product through openings as they may touch dangerous

voltage points or short-out parts that could result in a ﬁre or electric shock. Never spill liquid of any

kind on the product.

-Do not attempt to service this product yourself as opening or removing covers may expose you to

dangerous voltage or other hazards. Refer all servicing to qualiﬁed service personnel.

-Unplug this product from the wall outlet and refer servicing to qualiﬁed service personnel under

the following conditions:

*When the power-supply cord or plug is damaged.

*If liquid has been spilled, or objects have fallen into the product.

*If the product has been exposed to rain or water.

*If the product does not operate normally by following the operating instructions. Adjusting only

those controls that are covered by the operating instructions as an improper adjustment of other

controls may result in damage and will often require extensive work by a qualiﬁed technician to

restore the product to its normal operation.

*If the product has been dropped or damaged in any way, or when the product exhibits a distinct

change in performance - this indicated a need for service.

-Replacement Parts - When replacement parts are required, be sure the service technician has used

replacement parts speciﬁed by the manufacturer or have the same characteristics as the original

part. Unauthorized substitutions may result in ﬁre, electric shock, or other hazards.

-Safety Check - Upon completion of any service or repairs to this product, ask the service technician

to perform safety checks to determine that the product is in proper operating condition.

-The product should be mounted to a wall or ceiling only as recommended by the manufacturer.

-The product should be situated away from heat sources such as radiators, heat registers, stoves,

or other products (including ampliﬁers) that produce heat.

FCC Information

This device complies with part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) This device

must accept any interference received, including interference that may cause undesired

operation.

CAUTION

Changes or modiﬁcations not expressly approved by AXVUE may void the users authority to operate

this equipment.

NOTE

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment

oﬀ and on, the user is encouraged to try to correct the interference by one or more of the following

measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit diﬀerent from that to which the receiver is

connected.

CAUTION

1. To comply with FCC RF exposure compliance requirements, a separation distance of at least 20

cm must be maintained between the antenna of this device and all persons.

2. This transmitter must not be co-located or operating in conjunction with any other antenna or

transmitter.

Get to know us at: www.axvue.com

Colors and styles may vary.

Please retain information for future reference.

AXVUE stands behind all of its products.

If you are not completely satisﬁed or have any questions,

please contact us at http://www.axvue.com

connect with us:

AXVUE INC.

Model: E662

12/17

MADE IN CHINA

DO NOT EXPOSE TO RAIN OR MOISTURE

732-0E06620-0700