ARCCAPTAIN ARC200 Manuale d'uso - Pagina 5

Sfoglia online o scarica il pdf Manuale d'uso per Sistema di saldatura ARCCAPTAIN ARC200. ARCCAPTAIN ARC200 15. Inverter welding machine

1.1 Working Environment

Welding should be carried out in dry environment with humidity of 90% or less.

The temperature of the working environment should be between -10℃ and 40℃.

Avoid welding in the sunlight and rain. Keep it dry at all times.

Avoid welding in dusty area or environment with corrosive chemical gas.

Gas shielded arc welding should be operated in environment without strong airflow.

Over-current/over-voltage/over-heating protection circuit is installed in this machine. When the

network voltage, output current or inner temperature exceeds the set standard, the machine will stop

automatically. However, excessive use (e.g. too high voltage) of machine will lead to welder damage.

Hot workpiece can cause severe scald.

·Do not touch hot workpiece with bare hands.

·Cool the welding torch for a while after continuously working.

Excessive noise does great harm to people's hearing.

·Wear ear covers or other hearing protectors when welding.

·Give warning to onlooker that noise may be potentially hazardous

to hearing.

Magnetic field can make cardiac pacemaker a bit wonky.

·People with cardiac pacemaker should stay away from the

welding spot without first talking to a doctor.

Moving parts may injure your body.

·Please keep away from moving parts (like fan).

·Each door, panel, cover, baffle plate, and protective device the like

should be closed and located correctly.

Seek professional support when trouble strikes.

·When trouble strikes in installation and operation, please inspect

according to related contents in this manual.

· If you still cannot understand fully, or you still cannot solve the

problem, please contact the dealer to obtain professional support.