Epson AcuLaser CX11NF Manuale d'uso - Pagina 13

Sfoglia online o scarica il pdf Manuale d'uso per Stampante Epson AcuLaser CX11NF. Epson AcuLaser CX11NF 17. Multi-function colour laser printers
Anche per Epson AcuLaser CX11NF: Funzionamento di base Gude (26 pagine), Specifiche tecniche (4 pagine), Manuale di configurazione (32 pagine), Iniziare qui Manuale (8 pagine), Specifiche tecniche (2 pagine), Manuale supplementare (6 pagine), Aggiornamento (1 pagine), Bollettino di assistenza prodotti (5 pagine), Specifiche tecniche (4 pagine)

Replacing the Photoconductor

Handling Precautions

Always follow these precautions when replacing the

photoconductor:

❏ The photoconductor weighs 6.16 lb (2.8 kg). Be sure to

hold it firmly by the handle when carrying it.

❏ Avoid exposing the photoconductor to light any longer than

necessary.

❏ Be careful not to scratch the surface of the drum and belt.

Also, avoid touching the drum; oil from your skin may

permanently damage its surface and affect print quality.

❏ Do not store the photoconductor in an area subject to direct

sunlight, dust, salty air, or corrosive gases (such as

ammonia). Avoid locations subject to extreme or rapid

changes in temperature or humidity.

❏ Do not tilt the photoconductor.

Warning:

Keep the photoconductor out of the reach of children.

Do not dispose of a used photoconductor in fire, as it may explode

and cause injury. Dispose of it according to local regulations.

Removing and Replacing the

Photoconductor

1. Make sure the CX11N is turned on.

2. Remove any paper loaded in the ADF (CX11NF only).

3. Slowly flip back the scanner until it stops.

4. Close the output tray extension.

Epson AcuLaser CX11N/CX11NF

5. Lift up cover B.

6. Pull up the orange lever inside cover B.

7. Lift out the photoconductor using its handle.

8. Remove the new photoconductor from its package and pull

off the protective sheet.

8/05

Epson AcuLaser CX11N/CX11NF