Epson C31C564011 - TM P60 B/W Thermal Line Printer Manuale d'uso - Pagina 3

Sfoglia online o scarica il pdf Manuale d'uso per Stampante Epson C31C564011 - TM P60 B/W Thermal Line Printer. Epson C31C564011 - TM P60 B/W Thermal Line Printer 8. User manual

Stampa la pagina

Purpose of This Manual

This manual provides information to operators of the TM-P60 printer to describe basic operations to enable safe
and correct use of the printer. (Illustrations are provided at the end of this manual.)

Notes on Use

❏
Be sure to use the power switch to turn the printer
on and off.
❏
Do not unplug or plug in the AC adapter (option)
during printing.
❏
Be sure not to open the roll paper cover when the
printer is operating.

Notes on Installation

❏
Be sure that the printer is installed horizontally
when you install it on a table.
Notes on the Rechargeable battery
The safety precautions on the rechargeable battery are described previously in this manual. For more details, see
the battery instructions that came with the printer.
Part Names
See illustration A.
Unpacking
The following items are included for the standard specification printer. If any item is damaged, contact your
dealer.
❏
Printer
❏
Roll paper
Control Panel (LEDs and Switches–Illustration B)
POWER LED
Meaning
On
Power is on.
Off
Power is off.
Flashing
The printer is in power-off operation or is in an area where wireless communication is not possible.
Printer
ERROR
Condition
LED
Power On
On
Off
Flashing
Power Off,
On
battery
installed, and
Off
AC adapter
(option)
connected
Printer
BATT. LED
Condition
Power On
On
and battery
Off
installed
Flashing
Power Off
On
and battery
Off
installed
Meaning
Printer is offline (paper out, power-on initialization, roll paper cover open, power-off
operation, or when the battery is used to supply the power, the remaining battery
charge is not enough for printer operation.)
Printer is online.
The temperature of the printer is too high. The printer resumes printing automatically
when the temperature returns to normal.
Indicates that an abnormality occurred during battery charging. The battery must be
replaced with a new one.
Battery is being charged (BATT. [battery] LED is on.)
Meaning
Remaining battery charge is not enough. It must be fully charged.
Remaining battery charge is adequate.
Remaining battery charge is below half.
The battery is being charged.
The battery is fully charged.
❏
Protect the printer from impact.
❏
Do not apply excessive force to the printer case.
❏
Do not place food or beverages such as coffee on
the case of the printer.
❏
Be sure that roll paper side is on the bottom when
you install the printer vertically.
❏
Battery pack and its User's Manual
❏
User's Manual (this manual)
3