Aydin Displays CFP24W2 Series Manuale d'uso - Pagina 3
Sfoglia online o scarica il pdf Manuale d'uso per Monitor Aydin Displays CFP24W2 Series. Aydin Displays CFP24W2 Series 20.
Stampa la pagina1.
Introduction
The Model CFP24W2 AMLCD Monitor is a 24" diagonal display with a native
resolution of 1600 x 1200 (WUXGA). The display is designed to operate from
115/220 VAC, 60Hz, single phase. Inputs are provided for DVI-D, VGA and Video.
Generally all VESA compatible video formats are supported. If a mode isn't
supported, the factory can add special modes. Picture-in Picture (PIP) mode can
be provided as an option.
2.
Specifications
Specifications
Display Type: 24.0" WUXGA TFT
Active Display Area: 20.41"(w) x 12.76"(h)
(518.4 x 324.0mm)
Pixel Pitch: .270 mm
Brightness: 500 nits
Viewing Angle: Left/Right 89º/89º
Up/Down 89º/89º
Contrast Ratio: 1000:1
Response Time: Tr=16; Tf=8
Display Colors: 16.7M
Synchronization
Range:
Input Signal:
Video:
Analog 0.7V p-p/75
Sync:
Separate sync. TTL level
Composite Sync: Positive/Negative
Sync on Green (Video 0.7Vp-p
and Sync 0.3Vp-p)
Input Interface: VGA (HD-15), DVI-D, NTSC (RCA),
S-Video (5 pin DIN)
Video Input
75 Ohms
Impedance:
Resolutions
Supported:
150-CF24-101
Horizontal: 31.5 to 80kHz
Vertical: 60 to 76Hz
!
Horizontal Sync: Positive/Negative
Vertical Sync: Positive/Negative
640 x 480 @ 60, 72, 75, 85
800 x 600 @ 60, 70, 72, 75, 85
1024 x 768 @ 60, 70, 72, 75
1280 x 1024 @ 60, 70, 75, 85
1600 x 1200 @ 60 (native)
Environmental
Temperature:
Humidity:
(Non-Condensing)
Altitude:
Shock:
30g, 11ms, ! Sine
Vibration:
1g RMS 20-500Hz
Power
Requirements:
Dimensions
(w/o stand):
Touch Option: Resistive
Touch Interface: USB, Serial
3 of 19
Operating: 0°C to 50°C
Storage: -20°C to +70°C
Operating: 10 to 90%
Storage: 10 to 90%
Operating: 0 to 12,000 ft.
Storage: 0 to 40,000 ft.
Voltage: Internal 88-264 Volts
VAC auto ranging @
47-63 Hz
Power: 100 W Nominal
Current: 1.2 @ 120 V (Typical)
Height: 16.61" (421.9 mm)
Width: 24.27" (616.5 mm)
Depth: 3.1270" (79.43 mm)
Weight: 20 lbs
(9.07 kg)