Cisco 1503 Manuale del software - Pagina 23

Sfoglia online o scarica il pdf Manuale del software per Interruttore Cisco 1503. Cisco 1503 49. Cisco systems switch user manual

start tftp-download

Syntax:

Mode:

Description:

Xmodem Download Command

Use this command to download firmware to the hub with the Xmodem protocol.

start xmodem-download

Syntax:

Mode:

Description:

start tftp-download

Administrator

Starts the firmware download process. In order to use this command, the hub

and the TFTP server must be connected to the same Ethernet LAN segment.

To test whether or not both devices are connected to the same network segment,

send a ping command from the TFTP server to the hub. If the ping command is

unsuccessful, confirm that you have configured the hub with an IP address

using the ip-address command.

start xmodem-download

Administrator

Downloads firmware updates to the hub with the Xmodem protocol.

Using Terminal Emulation Software

After entering this command, open the file transfer function in your terminal

emulation software. The software must support the Xmodem protocol. Specify

the firmware filename, and start the file transfer, being sure to specify "Send"

or "Upload" for the firmware file.

The default file name for firmware c1500.bin. You can use different names for

hub firmware files but the file name must end in .bin.

Download Status

The status of the firmware download is shown at the bottom of the terminal or

PC screen. After downloading firmware, you will have to log into the

configuration program again.

Firmware Load and Restart Commands

Using Your Hub Software 3-23