Sharp CD-E250E Manuale operativo - Pagina 2

Sfoglia online o scarica il pdf Manuale operativo per Impianto stereo Sharp CD-E250E. Sharp CD-E250E 32. Mini component system
Anche per Sharp CD-E250E: Manuale operativo (32 pagine)

Stampa la pagina

CD-E250E

Downloaded From Disc-Player.com Sharp Manuals

Special notes

NOTES FOR USERS IN THE U.K. AND IRELAND

The mains lead of this product is fitted with a non-rewireable

(moulded) plug incorporating a 3A fuse. Should the fuse need to

be replaced, a BSI or ASTA approved BS 1362 fuse marked

and of the same rating as above, which is also indicated on

the pin face of the plug must be used.

Always refit the fuse cover after replacing the fuse. Never use

the plug without the fuse cover fitted.

In the unlikely event of the socket outlet in your home not being

compatible with the plug supplied, cut-off the mains plug and fit

an appropriate type.

DANGER:

The fuse from the cut-off plug should be removed and the cut-off

plug destroyed immediately and disposed of in a safe manner.

Under no circumstances should the cut-off plug be inserted else-

where into a 13A socket outlet as a serious electric shock may

occur.

To fit an appropriate plug to the mains lead, follow the instruc-

tions below:

IMPORTANT:

The wires in the mains lead are coloured in accordance with the

following code:

Blue

: Neutral

Brown

: Live

As the colours of the wires in the mains lead of this product may

not correspond with the coloured markings identifying the termi-

nals in your plug, proceed as follows:

G The wire which is coloured blue must be connected to the plug

terminal which is marked N or coloured black.

G The wire which is coloured brown must be connected to the

plug terminal which is marked L or coloured red.

Ensure that neither the brown nor the blue wire is connected to

the earth terminal in your three pin plug.

Before replacing the plug cover, make sure that:

G If the new fitted plug contains a fuse, its value is the same as

that removed from the cut-off plug.

G The cord grip is clamped over the sheath of the mains lead

and not simply over the lead wires.

IF YOU HAVE ANY DOUBT, CONSULT A QUALIFIED ELEC-

TRICIAN.

SERVICE INFORMATION

In the unlikely event of your equipment requiring repair, please

contact the dealer or supplier from whom it was purchased. Where

this is not possible, please visit our web-site www. sharp.co.uk/

customersupport.

Customers without internet access may telephone 08705

274277 during office hours (or (01) 676 0648 if telephoning

from lreland).

Please note; all calls will be charged at local rate.

Certain replacement parts and accessories may be obtained from

our main parts distributor.

WILLOW VALE ELECTRONICS LTD.

0121 766 5414

In the unlikely event of this equipment requiring repair during the

guarantee period, you will need to provide proof of the date of

purchase to the repairing company.

Please keep your invoice or receipt, which is supplied at the

time of purchase.

03/2/17

CD-E250E(E)1.fm

0301