Sharp CD-E250E Manuale operativo - Pagina 29

Sfoglia online o scarica il pdf Manuale operativo per Impianto stereo Sharp CD-E250E. Sharp CD-E250E 32. Mini component system
Anche per Sharp CD-E250E: Manuale operativo (32 pagine)

Stampa la pagina

! Remote control

" The remote control does

! If trouble occurs

When this product is subjected to strong external interference

(mechanical shock, excessive static electricity, abnormal supply

voltage due to lightning, etc.) or if it is operated incorrectly, it may

malfunction.

If such a problem occurs, do the following:

1 Set the unit to the stand-by mode and turn the power on again.

2 If the unit is not restored in the previous operation, unplug and

Note:

If neither operation above restores the unit, clear all the memory by

resetting it.

Downloaded From Disc-Player.com Sharp Manuals

Symptom

Possible cause

" Is the AC power lead of the unit

not operate.

plugged in?

" Is the battery polarity correct?

" Are the batteries dead?

" Is the distance or angle incor-

rect?

" Does the remote control sensor

receive strong light?

plug in the unit, and then turn the power on.

! Clearing all the memory (reset)

1 Press the ON/STAND-BY button to enter the power stand-by

mode.

2 Whilst pressing down the CLOCK button and the DISC SKIP

button, press the ON/STAND-BY button until "CLEAR" appears.

Caution:

This operation will erase all data stored in memory including clock,

timer settings, tuner preset, and CD programme.

! Condensation

Sudden temperature changes, storage or operation in an extremely

humid environment may cause condensation inside the cabinet (CD

pickup, tape heads, etc.) or on the transmitter on the remote control.

Condensation can cause the unit to malfunction. If this happens,

leave the power on with no disc (or cassette) in the unit until normal

playback is possible (about 1 hour). Wipe off any condensation on

the transmitter with a soft cloth before operating the unit.

! Before transporting the unit

1 Press the ON/STAND-BY button to turn the power on.

2 Press the CD button.

3 Press the OPEN/CLOSE

button to open the disc tray.

Remove all CDs inserted in the unit.

4 Press the OPEN/CLOSE

button to close the disc tray.

Make sure that "NO DISC" is displayed.

5 Press the ON/STAND-BY button to enter the stand-by mode,

and then unplug the AC power lead from the wall socket.

03/2/17

CD-E250E(E)3.fm

CD-E250E