Samsung 5 Series Manuale d'uso - Pagina 13

Stampa la pagina

✎

NOTE

After selecting Screen Fit in HDMI (1080i / 1080p)

or Component (1080i / 1080p) mode: Adjusts the

Position or Size by using ▲, ▼, ◄, ► button.

Depending on the input source, the picture size

options may vary.

The available items may differ depending on the

selected mode.

In PC mode, only

16:9 and 4:3 modes can be

adjusted.

Settings can be adjusted and stored for each

external device connected to an input of the TV.

If you use the

Screen Fit function with HDMI 720p

input, 1 line will be cut at the top, bottom, left and

right as in the overscan function.

Digital Noise Filter (

Off / Low / Medium / High / Auto

■

/ Auto Visualisation / Demo): When the broadcast

signal is weak, some static and ghosting may appear.

Select one of the options until the best picture is

displayed.

Auto Visualisation: When changing analog channels,

displays signal strength.

✎

When bar is green, you are receiving the best

possible signal.

MPEG Noise Filter (Off / Low / Medium / High /

■

Auto): Reduces MPEG noise to provide an improved

picture quality.

✎

Disabled under PC mode.

HDMI Black Level (Normal / Low)

■

level on the screen to adjust the screen depth.

✎

Available only in HDMI mode (RGB signals).

Film Mode (Off / Auto1 / Auto2)

■

automatically sense and process film signals from all

sources and adjust the picture for optimum quality.

✎

Available in TV, AV, COMPONENT (480i / 1080i)

and HDMI (480i / 1080i).

Auto

Protection Time (2 hours / 4 hours / 8 hours /

■

10 hours / Off): If the same image remains on the

screen, Auto Screen Burn Protector will work.

Picture Reset (OK / Cancel)

Resets your current picture mode to its default settings.

Set the input source to PC.

Auto Adjustment

Adjust frequency values/positions and fine tune the settings

automatically.

✎

Screen

■

Using Your TV as a Computer (PC) Display

Setting Up Your PC Software (Based on Windows XP)

Depending on the version of Windows and the video card,

the actual screens on your PC may differ in which case the

same basic set-up information will almost always be applied.

(If not, contact your computer manufacturer or Samsung

Dealer.)

1. Click on "Control Panel" on the Windows start menu.

: Selects the black

2. Click on "Appearance and Themes" in the "Control

3. Click on "Display" and a display dialog box will appear.

: Sets the TV to

4. Navigate to the "Settings" tab on the display dialog-box.

Setting up the TV with Your PC

Not available when connecting through HDMI/DVI

cable.

Coarse / Fine

: Removes or reduces picture noise. If the

noise is not removed by Fine-tuning alone, then adjust

the frequency as best as possible (Coarse) and Fine-

tune again. After the noise has been reduced, readjust

the picture so that it is aligned to the centre of screen.

Position

: Adjust the PC screen position with direction

button (▲ / ▼ / ◄ / ►).

Image Reset

: Resets the image to default settings.

Panel" window and a display dialog-box will appear.

The correct size setting (resolution) [Optimum: 1920 X

1080 pixels]

If a vertical-frequency option exists on your display

settings dialog box, the correct value is "60" or "60 Hz".

Otherwise, just click "OK" and exit the dialog box.

English