Cisco 7925G - Unified Wireless IP Phone VoIP Manuale d'uso - Pagina 11

Sfoglia online o scarica il pdf Manuale d'uso per Telefono IP Cisco 7925G - Unified Wireless IP Phone VoIP. Cisco 7925G - Unified Wireless IP Phone VoIP 28. Wavelink avalanche management console
Anche per Cisco 7925G - Unified Wireless IP Phone VoIP: Scheda tecnica (8 pagine), Note di rilascio (16 pagine), Manuale degli accessori (20 pagine), Manuale degli accessori (13 pagine), Manuale di amministrazione (19 pagine), Manuale d'uso (10 pagine), Manuale d'uso (16 pagine), Manuale rapido (14 pagine), Manuale di amministrazione (23 pagine), Manuale di installazione (21 pagine), Manuale di amministrazione (14 pagine)

Securing the Phone with a Lock Set and Cable Lock

You can secure the Cisco Unified Wireless IP Phone 7925G to a desktop by ordering the lock set from us. For more information,

see the

Cisco Unified Wireless IP Phone 7925G Accessory

To install the lock set, use the diagram and follow these steps:

Install the Lock Set on the Phone

1. Insert the loops at the ends of the security cable through the C-ring.

2. Insert the C-ring with cable loops through the slot on back of phone.

3. Use the combination lock to secure the ends of the C-ring around cable loops and phone.

Your system administrator can configure your phone to send you an audible alert (beep) when you are out of range of the

wireless network. When you hear the alert, the

When you are out of range of the wireless network, you are not able to use the phone for features requiring a wireless network

connection, such as making and receiving calls.

If your system administrator enabled the out-of-range alert, depending on the configuration, you might hear a beep only once,

or every 10, 30, or 60 seconds until you are back within the range of the wireless network.

To reconnect to the wireless network after you hear the alert, move to another location until you see the signal icon

the phone screen again.

(no signal) icon displays on the phone screen.

Guide.