Cisco 7925G - Unified Wireless IP Phone VoIP Manuale di installazione - Pagina 14

Sfoglia online o scarica il pdf Manuale di installazione per Telefono IP Cisco 7925G - Unified Wireless IP Phone VoIP. Cisco 7925G - Unified Wireless IP Phone VoIP 21. Wavelink avalanche management console
Anche per Cisco 7925G - Unified Wireless IP Phone VoIP: Scheda tecnica (8 pagine), Note di rilascio (16 pagine), Manuale d'uso (28 pagine), Manuale degli accessori (20 pagine), Manuale degli accessori (13 pagine), Manuale di amministrazione (19 pagine), Manuale d'uso (10 pagine), Manuale d'uso (16 pagine), Manuale rapido (14 pagine), Manuale di amministrazione (23 pagine), Manuale di amministrazione (14 pagine)

Wireless LAN Settings for Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G

Wireless LAN Settings for Cisco Unified Wireless IP Phone 7925G, 7925G-EX,

and 7926G

Before the phone can connect to the WLAN, you must configure the network profile for the phone with the

WLAN settings. You can use one of the following methods for setting up the network profiles.

WLAN Settings from Cisco Unified Wireless IP Phone Web Pages

You can access the Cisco Unified Wireless IP Phone web pages to set up the WLAN settings in the network

profile. For a new phone with the factory default settings, you must use the USB cable to connect the phone

to your PC.

Headset Usage

Although Cisco performs some internal testing of third-party wired and Bluetooth wireless headsets for use

with the wireless phone, Cisco does not certify or support products from headset or handset vendors. Because

of the inherent environmental and hardware inconsistencies in the locations where phones are deployed, there

is not a single "best" solution that is optimal for all environments. Cisco recommends that customers test the

headsets that work best in their environment before deploying a large number of units in their network.

Use CSA or ATEX qualified Bluetooth accessories with the Cisco Unified Wireless IP Phone 7925G-EX

Caution

in hazardous environments.

Cisco recommends the use of good quality external devices, like headsets that are screened against unwanted

radio frequency (RF) and audio frequency (AF) signals. Depending on the quality of these devices and their

proximity to other devices such as cell phones and two-way radios, some audio noise may still occur.

The primary reason that a particular headset would be inappropriate for the phone is the potential for an audible

hum. This hum can be heard by either the remote party or by both the remote party and the phone user. Some

humming or buzzing sounds can be caused by a range of outside sources; for example, electric lights, being

near electric motors or large PC monitors. In some instances, the mechanics or electronics of various headsets

can cause remote parties to hear an echo of their own voice when they speak to phone users.