Samsung U28R550 Manuale d'uso - Pagina 26

Sfoglia online o scarica il pdf Manuale d'uso per Monitor Samsung U28R550. Samsung U28R550 45.
Anche per Samsung U28R550: Manuale d'uso (46 pagine)

Chapter 05

Configuring the PIP/PBP Settings

Function Key Guide →

→

PIP/PBP

A detailed description of each function is provided. Refer to your product for details.

― The functions available may vary depending on the product model. The colour and shape of parts may

differ from what is shown. Specifications are subject to change without notice to improve quality.

Enable or disable the

PIP/PBP Mode

function.

The PIP (Picture in Picture) function separates the screen into two parts. One source device is displayed

on the main screen at the same time the another source device is displayed in inset windows.

The PBP (Picture by Picture) function separates the screen in half displaying output from two different

source devices simultaneously on the left and right sides of the screen.

―

PIP/PBP

mode is compatible with Windows 7, Windows 8, and Windows 10.

― The

PIP/PBP

function may not be available depending on the specifications of the graphics card used. If the

screen is blank in

PIP/PBP

mode when the optimum resolution is selected, go to Control Panel → Display →

Screen Resolution and click Detect on the PC. (Instructions are based on Windows 7.) If the screen is blank

when the resolution is set to the optimum resolution, change the resolution to 1280 x 1024.

― The screen may flicker briefly or appear after a delay when you enable or disable the

when you change the screen size with the

PIP/PBP

and a product are connected to two or more input sources. It has nothing to do with the performance of

a product. The issue is mainly caused when the video signals are delayed in transmission to the product

depending on the graphics card performance.

― When the

PIP/PBP

function is enabled, the resolution will not be able to automatically switch to the

optimum resolution due to a compatibility issue between the graphics card and the Windows system.

Set

PIP/PBP Mode

to Off. Alternatively, restart the product, then set the resolution to the optimum setting

using the Windows interface.

― If the product is set to an incompatible resolution, the product may display an abnormal or blank screen.

Change to a supported resolution by referring to the Standard Signal Mode Table.

PIP/PBP

function or

function activated. This can typically arise when a PC