Siemens SN 65E001 Manuale di istruzioni per l'uso - Pagina 6
Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Lavastoviglie Siemens SN 65E001. Siemens SN 65E001 28.
Stampa la pagina
en
Water softening system
To ensure good washing results,
the dishwasher requires soft water,
i.e. containing low amounts of lime,
otherwise white limescale will be
deposited on the utensils and inner
container.
Tap water above a specific degree of
water hardness must be softened,
i.e. descaled, for use in a dishwasher.
Water is softened with special salt in the
water softening system of the dishwasher.
The setting and therefore the required
amount of salt depends on the degree
of hardness of your tap water (see table).
Water hardness table
Hardness
_
Clarke
range
0–8
soft
9–20
medium
21–26
hard
27–44
hard
6
Set
The amount of salt dispensed can be set
in 4 stages depending on the hardness
of your water. Accordingly 0, 1, 2 or
3 displays are lit (see table).
Factory setting: 1.
Change the setting as follows:
mmol/l
Setting
0–1,1
0
1,2–2,9
1
3,0–3,7
2
3,8–6,2
3
Find out about the hardness value
of your tap water. Your water supply
company or customer service will assist
you.
Setting can be found in the water
hardness table.
Open the door.
Switch on ON/OFF switch
Hold down button >
Start button
until the End display
9
and salt refill indicator
8
Release buttons.
The salt refill indicator
the displays A are lit (= setting 1).
Button <
press until the required
5
setting has been selected.
Press Start button
The End display
8
indicator
go out.
11
The selected setting is saved.
Close the door.
A
.
1
and press
6
flash.
11
flashes and
11
.
9
and salt refill
B
C