Siemens EC745RT90A Istruzioni per l'utente - Pagina 13

Sfoglia online o scarica il pdf Istruzioni per l'utente per Piano cottura Siemens EC745RT90A. Siemens EC745RT90A 25.

- Remove all the burner covers, pan supports and

control knobs.

- Loosen the screws on the burners.

Use the disassembly lever 483196 availablle from our

Technical Assistance Service. To release the front clips,

apply the lever to the area shown in figure 10.

Fig. 10

To assemble the grease splash tray again, proceed in

the reverse order to removal.

It is important that all the seals are refitted to form a seal.

These devices are essential for the correct operation of

the appliance as they prevent liquids and dirt from

entering the appliance.

Refit the control knobs.

Never remove the tap spindle. In the event of a

malfunction, change the whole tap.Fig. 11.

Fig. 11

Warning! After finishing, the sticker indicating the new type

of gas must be placed close to the specifications plate.