Ricoh Pro L5160 Quide di avvio rapido - Pagina 22

Sfoglia online o scarica il pdf Quide di avvio rapido per Stampante Ricoh Pro L5160. Ricoh Pro L5160 32. Additional function 2
Anche per Ricoh Pro L5160: Manuale delle impostazioni di Rip (44 pagine), Manuale di informazioni sulla sicurezza (32 pagine), Manuale (12 pagine)

CIP Training L5160/L5130

Additional Functions

The optimum adjustment value differs for each product of media.

It is recommended to save the print settings and adjustment value for each product of media.

[Preparation for registration]

1. Load the media and set following parameters.

Media shape (outer /inner) Media type, Media thickness, Head height, Vacuum level.

2. Press [Standard Procedure] key.

3. Press [Print Mode settings] and select print mode from

[6 Pass], [8 Pass], [12 Pass], [16 Pass], and [32 Pass].

In the case of 4CW machines,

select from [6 Pass], [8 Pass], [12 Pass], [16 Pass], [32 Pass],

[12 Pass (White)], [16 Pass (White)], and [32 Pass (White)].

4. Set the Heater temperature used actual print.

Confirm the heater temperature with Rip software and set to the control panel.

5. Set the following parameters.

Auto Detect Media Width - ON/OFF, Right-side Edge, Width,

Special wind settings, Special feed settings.

See the following sections for detail.

- "Manually Input the Right-side Edge Position and Width of Media"

- "Additional Drive Mode of Roll-Up Holder"

- "Additional Drive Mode of Roll Holder"

6. Press the [Media Feed Adjustment] and select [Auto] or [Manual].

Execute the Media feed adjustment.

7. Press the [Drop Position Adjustment] and select [Auto] or [Manual].

Execute the Drop position adjustment.

8. Print the actual image and optimize [Micro Setting] and [Media Feed Correction]. See the

section "Modified the Connection Method" for detail.

[How to operate]

9. Press the [Standard Procedure] key.