Ricoh Provence-P2W Manuale di servizio - Pagina 6

Sfoglia online o scarica il pdf Manuale di servizio per Stampante Ricoh Provence-P2W. Ricoh Provence-P2W 48. Machine code: j006

Organic Cleaners



CAUTION

1. During preventive maintenance, never use any organic cleaners (alcohol,

etc.) other than those described in the service manual. (Refer the "2.

Preventive Maintenance" in the Service Manual.)

2. Make sure the room is well ventilated before using any organic cleaner.

Always use organic solvents in small amounts to avoid breathing the fumes

and becoming nauseous.

3. Switch the machine off, unplug it, and allow it to cool before doing preventive

maintenance. To avoid fire or explosion, never use an organic cleaner near

any component that generates heat.

4. Wash your hands thoroughly after cleaning parts with an organic cleaner to

avoid contamination of food, drinks, etc. which could cause illness.

Power Plug and Power Cord



WARNING

1. Before servicing the machine (especially when responding to a service call),

always make sure that the power plug has been inserted completely into the

power source. A partially inserted plug could lead to heat generation (due to

a power surge caused by high resistance) and cause a fire or other problems.

2. Always check the power plug and make sure that it is free of dust and lint.

Clean it if necessary. A dirty plug can generate heat and cause a fire.

3. Inspect the entire length of the power cord for cuts or other damage. Replace

the power cord if necessary. A frayed or otherwise damaged power cord can

cause a short circuit which could lead to a fire or personal injury from

electrical shock.

4. Check the length of the power cord between the machine and power supply.

Make sure the power cord is not coiled or wrapped around any object such

as a table leg. Coiling the power cord can cause excessive heat to build up

and could cause a fire.

5. Make sure that the area around the power source is free of obstacles so the

power cord can be removed quickly in case of an emergency.

6. Make sure that the power cord is grounded (earthed) at the power source

with the ground wire on the plug.

7. Connect the power cord directly into the power source. Never use an

extension cord.

8. When you disconnect the power plug from the power source, always pull the

plug, not the cable.