Ricoh SP3 Bollettino tecnico - Pagina 6

Sfoglia online o scarica il pdf Bollettino tecnico per Stampante Ricoh SP3. Ricoh SP3 28.

Stampa la pagina
Model:
SP3
Subject:
Controller Board ROM Modification
From:
QAC Field Information Dept.
Classification:
This bulletin describes the software modifications for the printer controller board.
The new software version has been included in the controller board from October
production.
Category
Scanner Option
When there is an original in the ADF and no
paper on the exposure glass, if the user scans
the original using the flat-bed original mode
from the PC, the controller may hang up.
Scanner Option
Whenever the power is on, the controller board
sometimes performs a SCSI Bus reset.
Scanner Option
When scanning using 256 gray scales, 300dpi,
and the maximum scanning area, the controller
cannot scan the image and a time out error
occurs.
New PCL
Using the new PCL printer driver (by Software
Printer Driver
2000), if a different paper tray is selected for
(Software 2000)
the first page with this printer driver, the first
page cannot be stapled together with the
following pages
Important: This modification is required if the scanner option is installed.
Before the scanner option is installed, check the software version of the
controller board.
If it is ver. 2.29 or earlier, replace the controller software.
NOTE: Note that the software version used on the production line skipped from ver. 2.27
to 2.30.
Controller Board Part Number and Software Version:
Product Code
A649-00
T
echnical
Troubleshooting
Mechanical
Paper path
Other (
)
Problem
Controller Board
A6495100Q
B
ulletin
Date:
31-Oct-97
Prepared by:
Part information
Electrical
Transmit/receive
Software Version
ver. 2.30
PAGE: 1/1
No:
4
A.Tokoyama
Action required
Service manual revision
Retrofit information
Countermeasure
Modified software
Modified software
Modified software
Modified software