Cisco 12816 Manuale di istruzioni per la sostituzione - Pagina 16

Sfoglia online o scarica il pdf Manuale di istruzioni per la sostituzione per Router di rete Cisco 12816. Cisco 12816 32. Blower module and air filter for cisco 12016, cisco 12416, and cisco 12816 router
Anche per Cisco 12816: Istruzioni per il disimballaggio Manuale (28 pagine), Scheda tecnica (9 pagine), Manuale di istruzioni (16 pagine), Manuale di istruzioni per la sostituzione (18 pagine)

Removing and Installing the Chassis

Inserting the Chassis into the Rack

When the chassis and scissor-jack platform have been positioned in front of the rack with the back of the

chassis facing the opening between the rack posts, you must expand the scissor-jack platform to raise

the chassis to the same height as the rack-mounting platform installed in the rack.

To insert the chassis into the rack, follow these steps:

Step 1

With one person positioned on the side of the chassis to prevent it from tipping, use the 3/4-inch (19-mm)

socket, ratchet wrench, and extender bar to turn the scissor-jack screw counterclockwise to expand the

scissor-jack platform and slowly raise the chassis to the required installation insertion height.

(See

Figure 10

Scissor-jack

Counter-clockwise

expands platform

Step 2

Remove the four bolts and anchor clips that secure the base of the chassis to the scissor-jack platform.

(See

Cisco 12016, Cisco 12416, and Cisco 12816 Router Chassis Replacement Instructions

Figure

10.)

Raising the Chassis to the Insertion Height

Front of chassis

screw

Figure

11.)

Chassis anchor

clip and bolt

(2 on each side)

Scissor-jack

platform

Clockwise

closes platform

78-16082-01