Cisco 2620 Operazioni - Pagina 19
Sfoglia online o scarica il pdf Operazioni per Router di rete Cisco 2620. Cisco 2620 25. Modular access routers with aim-vpn/ep fips 140-2 non-proprietary security policy
Stampa la pagina
•
Protocols
All SNMP operations must be performed within a secure IPSec tunnel.
Remote Access
•
•
Related Documentation
For more information about the Cisco 2621XM and Cisco 2651XM modular access routers, refer to the
following documents:
•
•
•
Obtaining Documentation
Cisco documentation and additional literature are available on Cisco.com. Cisco also provides several
ways to obtain technical assistance and other technical resources. These sections explain how to obtain
technical information from Cisco Systems.
Cisco.com
You can access the most current Cisco documentation at this URL:
http://www.cisco.com/univercd/home/home.htm
You can access the Cisco website at this URL:
http://www.cisco.com
Cisco 2621XM and Cisco 2651XM Modular Access Routers with AIM-VPN/EP FIPS 140-2 Non-Proprietary Security Policy
OL-6262-01
esp-sha-hmac
–
esp-3des
–
esp-aes
–
The following algorithms are not FIPS approved and should be disabled:
MD-4 and MD-5 for signing
–
MD-5 HMAC
–
Telnet access to the module is only allowed via a secure IPSec tunnel between the remote system
and the module. The Crypto officer must configure the module so that any remote connections via
telnet are secured through IPSec.
SSH access to the module is only allowed if SSH is configured to use a FIPS-approved algorithm.
The Crypto officer must configure the module so that SSH uses only FIPS-approved algorithms.
Cisco 2600 Series Modular Routers Quick Start Guide
Cisco 2600 Series Hardware Installation Guide
Software Configuration Guide for Cisco 2600 Series, Cisco 3600 Series, and Cisco 3700 Series
Routers
Related Documentation
19