Epson VS240 Impostazione rapida - Pagina 2

Sfoglia online o scarica il pdf Impostazione rapida per Proiettore Epson VS240. Epson VS240 4.

Stampa la pagina

Adjust the image

1
If you don't see an image, press the Source Search button on the
projector or remote control to select the image source.
Note: If you still see a blank screen or have other display problems, see
the troubleshooting tips on the back of this sheet.
2
To raise the image, press the foot release button and lift the front of the
projector. Release the button to lock the foot in position.
3
VS340/VS345: To reduce or enlarge the image, turn the zoom ring.
VS240: To reduce or enlarge the image, press the T (reduce) or
W (enlarge) buttons on the projector.
VS340/VS345
VS240
4
Turn the focus ring to sharpen the image.
VS340/VS345
VS240
5
If your image looks like
off to one side of the screen at an angle. Place the projector directly in
front of the center of the screen, facing the screen squarely. If you can't
move the projector, use the horizontal keystone slider on the projector to
or
, you may have placed the projector
correct the image shape.
VS340/VS345
VS240
6
Your projector automatically adjusts images that look like
but if necessary you can press the
correct it.

Using the remote control

Make sure the batteries are installed as shown (two AA batteries).
Turn projector
on and off
Access projector
menus
Turn off projector
display
For more information on using the remote control, see the online User's
Guide.

Troubleshooting

If you see a blank screen or the No signal message after turning on your
computer or video device, check the following:
•
Make sure the Status light on the projector is blue and not flashing, and
the A/V Mute slide is open.
•
Press the Source Search button on the projector or the remote control
to switch to the correct image source, if necessary.
•
If you're using a Windows laptop, press the function key on your
keyboard that lets you display on an external monitor. It may be labeled
CRT/LCD or have an icon such as
Fn key while pressing it (such as Fn + F7). Wait a moment for the display
to appear.
•
If you're using a Mac laptop, open System Preferences and select
Displays. Click the Arrangement tab and select the Mirror Displays
checkbox.

Where to get help

Manuals
For more information about using the projector, click the icons on your
desktop to access the online manuals (requires an Internet connection). If you
don't see icons to the manuals, you can install them from the projector CD or
go to the Epson website, as described below.
or
,
or
button on the projector to
Choose which source
to display
Navigate projector
menus
Get solutions to
common problems
. You may have to hold down the