ACU-RITE 01540M Manuale di istruzioni - Pagina 6

Sfoglia online o scarica il pdf Manuale di istruzioni per Stazione meteorologica ACU-RITE 01540M. ACU-RITE 01540M 9. 5-in-1 pro+ weather sensor

5-in-1 Sensor Installation Guidelines

INSTALLATION HEIGHT

(1.5 meters) off the ground, in an open area. Higher is better for wind

measurements - the National Weather Service recommends 33 feet

(10 meters) high!

MOUNTING OPTIONS

directly onto wooden posts or surfaces that are 2"x 4" or larger. The sensor

can also be mounted directly to 3/4" steel pipe (available at hardware stores

and home centers).

SOLAR CELL INSTALLATION

sensor with the solar cell facing SOUTH.

This ensures the cell receives as much sun

as possible and orients wind direction.

5-in-1 Sensor Installation

1. Fasten mounting base (included) to a

post or pole (not included) using the 4

longer screws included in the hardware

bag.

2. Insert the mounting base into the hole

on the bottom of the sensor.

3. Make sure the arrows on the top of

the sensor are pointed in the proper

direction and the bubble level is

centered. The solar cell should be

facing south to properly orient the

wind direction.

4. Fasten the sensor into the mounting

base using the 2 shorter screws

included in the hardware bag.

Basic Setup is Complete

The 5-in-1 sensor will now synchronize with the display. It may take a few

minutes for synchronization to complete. If both or one of the units appear to

be functioning improperly, please refer to the troubleshooting section.

Mount the sensor at a minimum height of 5 feet

The included mounting bracket is designed to screw

Install the

The 5-in-1 sensor is now ready to use.

NO OBSTRUCTIONS

ABOVE OR AROUND

T H

S O U

(1.5 meters)