ACU-RITE 01645 Manuale di istruzioni - Pagina 13

Sfoglia online o scarica il pdf Manuale di istruzioni per Stazione meteorologica ACU-RITE 01645. ACU-RITE 01645 20. Weather center

Troubleshooting

Problem

No outdoor sensor

reception

no bars

Outdoor

temperature

is flashing or

showing dashes

Inaccurate forecast

• Relocate the display and/or the 3-in-1 sensor.

The units must be within 330 ft (100 m) of each other.

• Make sure both units are placed at least 3 feet (.9 m)

away from electronics that may interfere with the wireless

communication (such as TVs, microwaves, computers, etc).

• Use standard alkaline batteries (or lithium batteries in

sensor when temperature is below -4ºF/-20ºC). Do not use

heavy duty or rechargeable batteries. NOTE: It may take

a few minutes for display and sensor to synchronize after

batteries are replaced.

• Synchronize the units:

1. Bring both the sensor and display indoors and remove

at least one battery from each.

2. Make sure the A-B-C switch on both units match.

3. Reinstall the battery in the outdoor sensor.

4. Reinstall battery into the display.

5. Let the units sit within a couple feet of each other for a

few minutes to gain a strong connection.

Flashing of the outdoor temperature may be an indication of

wireless interference:

• Make sure the A-B-C switch in the battery compartments of

both the display and sensor are switched to the same letter.

You may choose A, B or C; but both units must match to

sync up. Sometimes changing to a different channel

can help.

• Weather Forecast icon predicts conditions for the next

12 to 24 hours, not current conditions.

• Has Learning Mode icon disappeared from the display?

Learning Mode must complete before forecast and pressure

will be accurate.

• Allow unit to run continuously for 33 days. Battery removal

or resetting the display will restart Learning Mode. After

14 days, forecast should be fairly accurate, however

Learning Mode calibrates for a total of 33 days.

Possible Solution