Sony XC-ST30CE Manuale tecnico - Pagina 13

Sfoglia online o scarica il pdf Manuale tecnico per Fotocamera digitale Sony XC-ST30CE. Sony XC-ST30CE 30. Black-and-white video camera module
Anche per Sony XC-ST30CE: Specifiche tecniche (4 pagine), Manuale d'uso (31 pagine), Manuale del prodotto (2 pagine), Manuale tecnico (31 pagine), Manuale (4 pagine)

Stampa la pagina

Using trigger pulse width

Set all DIP switches (1 to 4 on the rear panel) to 0.

You can obtain an arbitrary shutter speed by setting the

trigger pulse width within the range of 2 µ sec to 250

msec.

Mode 1 (Non-reset mode)

Exposure time = Trigger pulse width + 97 µ sec (EIA)

Trigger pulse width + 120 µ sec

(CCIR)

Notes

• The DIP switch 5 position is optional. (The field

setting is recomended.) The field setting can obtain a

sensitivity that is twice that of the frame setting.

• If you input another trigger pulse before the video

signal output for the previous trigger pulse is

completely output, an incorrect video signal will be

output.

• Specifications of trigger pulse

When using a trigger pulse like shown below, set

the TRIG polarity selector switch on the rear panel

to + :

2 µsec – 1/4 sec

1) If you set the trigger pulse with the DIP switches, use the

100 msec to 1/4 sec pulse width.

XC-ST51/ST51CE

XC-ST50/ST50CE

XC-ST30/ST30CE

Mode 2 (Reset mode)

2 – 5.0 V

0 – 0.6 V

When using a trigger pulse like shown below, set

the TRIG polarity selector switch on the rear panel

to – :

2 µsec – 1/4 sec

• Input impedance: 10 kΩ or more.

• The voltage and pulse width used are measured at pin

11 of a 12-pin multi-connector on the rear panel.

Mode Settings

4.0 – 5.0 V

0 – 2.0 V