ACU-RITE SENC 150 Manuale di riferimento - Pagina 7

Sfoglia online o scarica il pdf Manuale di riferimento per Convertitore multimediale ACU-RITE SENC 150. ACU-RITE SENC 150 20. Chevalier fsg-2a 1224 surface grinder cross feed “x” axis
Anche per ACU-RITE SENC 150: Manuale di installazione (8 pagine), Manuale di installazione (4 pagine), Manuale di installazione (6 pagine), Manuale di istruzioni (12 pagine)

Stampa la pagina
SENC 150
Mounting possibilities
Flush
Offset
mounting
mounting
 Use reading head leveling set screws when surfaces are
not flush.
Detailed information about mounting possibilities on page 11
(Mounting the encoder without backup spar) and on page 14
(Mounting the encoder with backup spar).
Backup spar
mounting
Space of ≤4.5 mm (≤0.18") use
reading head leveling screws!
Determining cable direction
 Determine cabel exit direction before mounting the encoder.
 To change the cable exit direction, remove the cover plate
and rotate it by 180°.
K1 - cable exit right side
1
K2 - cable exit left side
1
1

2 Mounting information

Do not pull out the PCB!
1
1
T-10 torx screw
Do not clamp the wires!
1
T-10 torx screw
max. 70 Ncm!
7