Cisco PIX 525 Manuale d'uso - Pagina 28

Sfoglia online o scarica il pdf Manuale d'uso per Hardware di rete Cisco PIX 525. Cisco PIX 525 30. Security appliance
Anche per Cisco PIX 525: Scheda tecnica (13 pagine)

Stampa la pagina

Installing a DC Power Supply

Figure 6-29 Attaching a Grounding Lug to the PIX Security Appliance

PIX security appliance

To rack

ground

Ensure that power is removed from the DC circuit. To ensure that all power is OFF, locate the circuit

Step 15

breaker on the panel board that services the DC circuit, switch the circuit breaker to the OFF position,

and tape the switch handle of the circuit breaker in the OFF position.

Strip the ends of the wires for insertion into the power connect lugs on the PIX 525.

Step 16

Refer to

Step 17

screw on the connector. Using the same method as for the ground wire, connect the negative wire and

then the positive wire.

Figure 6-30 Attaching DC Power Cables

Cisco PIX Security Appliance Hardware Installation Guide

6-28

Rear of

–

10-32 nuts

Figure 6-30

and insert the ground wire into the connector for the earth ground and tighten the

Grounding studs

on PIX DC model

2-hole copper

standard barrel

grounding lug

–

Chapter 6

PIX 525

78-15170-02