Cisco UCS B200 M3 Nota di installazione e manutenzione - Pagina 24

Sfoglia online o scarica il pdf Nota di installazione e manutenzione per Hardware di rete Cisco UCS B200 M3. Cisco UCS B200 M3 36. Blade server
Anche per Cisco UCS B200 M3: Manuale di installazione (34 pagine), Nota di installazione e manutenzione (37 pagine), Manuale (8 pagine), Manuale di aggiornamento (21 pagine), Nota di installazione e manutenzione (28 pagine)

Working Inside the Blade Server

S e n d d o c u m e n t c o m m e n t s t o u c s - d o c f e e d b a c k @ c i s c o . c o m

Installing a CPU and Heat Sink

Before installing a new CPU in a server, verify the following:

•

Caution

The CPU alignment tool shown in

connection pins between the motherboard and the CPU. Do not attempt this procedure without the

required tool, which is included with each CPU option kit.

To install a CPU and heat sink, follow these steps:

Prime the alignment tool by pressing the central button.

Step 1

Remove the new CPU from the packaging, and place it into the alignment tool as shown in

Step 2

Only touch the CPU by the edges.

Figure 14

Press the side lever on the alignment tool to grasp the CPU correctly aligned in the tool.

Step 3

Cisco UCS B200 M3 Blade Server Installation and Service Note

The CPU is supported for that model server.

A BIOS update is available and installed that supports the CPU/DIMM and server combination.

The service profile for this server in UCS Manager will recognize and allow the new CPU.

Loading the Alignment Tool

Figure 13

and

Figure 14

is required to prevent damage to the

Figure 14

OL-26624-01