Cisco UCS X10c Manuale di installazione e assistenza - Pagina 35
Sfoglia online o scarica il pdf Manuale di installazione e assistenza per Hardware di rete Cisco UCS X10c. Cisco UCS X10c 38. Front mezzanine gpu module
Stampa la pagina
Servicing the GPU Module
Gather the following tools before you start this procedure:
• #2 Phillips screwdriver
• T10 Torx screwdriver
Step 1
Remove the SSD drives.
See
Removing a Drive, on page
Step 2
Remove the GPU module.
a) Using a #2 Phillips screwdriver, remove the M3 screws.
b) Grasp the GPU module and remove it.
c) Grasp each of the two cable connectors and disconnect the cables from the module.
Step 3
(Optional) Remove the GPU card(s) from the GPU module.
a) Using a #2 Phillips screwdriver, remove the M3 screws.
b) Grasp each GPU at both ends and slide it out of the GPU module.
22.
Cisco UCS X10c Front Mezzanine GPU Module Installation and Service Guide
Recycling the PCB Assembly (PCBA)
27