Cisco ONS 15454 SDH E1-75 Manuale di riferimento
Sfoglia online o scarica il pdf Manuale di riferimento per Server Cisco ONS 15454 SDH E1-75. Cisco ONS 15454 SDH E1-75 22. Impedance conversion panel
Anche per Cisco ONS 15454 SDH E1-75: Manuale di riferimento rapido (16 pagine), Manuale (40 pagine), Installazione (13 pagine)
Stampa la pagina
Shelf and FMEC Hardware
This chapter provides a description of Cisco ONS 15454 SDH shelf and backplane hardware. Card and
cable descriptions are provided in
Chapter 4, "Optical Cards," Chapter 5, "Ethernet Cards,"
equipment, refer to the Cisco ONS 15454 SDH Procedure Guide.
Chapter topics include:
1.1 Overview, page 1-2
•
•
1.2 Typical DWDM Rack Layouts, page 1-3
1.3 Front Door, page 1-5
•
•
1.4 Front Mount Electrical Connection, page 1-9
1.5 E1-75/120 Conversion Panel, page 1-11
•
•
1.6 Coaxial Cable, page 1-12
1.7 Twisted-Pair Balanced Cable, page 1-12
•
•
1.8 Cable Routing and Management, page 1-13
1.10 Fan-Tray Assembly, page 1-15
•
1.11 Power and Ground Description, page 1-16
•
•
1.13 Cards and Slots, page 1-17
•
1.14 Software and Hardware Compatibility, page 1-20
•
The Cisco ONS 15454 SDH assembly is intended for use with telecommunications equipment only.
Note
Warning
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
This equipment must be installed and maintained by service personnel as defined by AS/NZS 3260.
Warning
Incorrectly connecting this equipment to a general-purpose outlet could be hazardous. The
telecommunications lines must be disconnected 1) before unplugging the main power connector or 2)
while the housing is open, or both.
April 2008
C H A P T E R
Chapter 2, "Common Control Cards," Chapter 3, "Electrical Cards,"
and
Cisco ONS 15454 SDH Reference Manual, R4.6
Chapter 6, "DWDM Cards."
1
To install
1-1