Cisco D-PCG1000 PowerKEY CAS Scheda tecnica - Pagina 3

Sfoglia online o scarica il pdf Scheda tecnica per Porta d'ingresso Cisco D-PCG1000 PowerKEY CAS. Cisco D-PCG1000 PowerKEY CAS 4. Conditional access system gateway

Cisco D-PCG1000 PowerKEY CAS Scheda tecnica
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.

Product Specifications

Table 3.
Product Specifications
Specification
Value
PowerKEY Specifications
ECM Generation
Supports 1000 broadcast sessions at a 4- to 15-second cryptocycle
PowerKEY ECM/EMM
As per PowerKEY Book 1 Specifications
Handling
MSK/ISK Decryption Rate
Up to 10 per second (RSA 1024-bit private operation)
Maximum Session Set-Up
10 sessions/second
Rate
● Per DVB Simulcrypt specification (ETSI TS 103 197: Digital Video Broadcasting, Headend
ECMG-to-SCS Interface
implementation of DVB SimulCrypt)
● Multiple SCS connections allowed supporting distributed SCS and redundancy
● SCS IP address configurable using the DNCS
EIS to SCS Interface
Per DVS-278 specification (SCTE DVS/278: Head-end Implementation of OpenCAS)
PowerKEY Conditional
Secures digital services using symmetric encryption algorithm for content protection and strong
Access System
authentication and digital signature for entitlement delivery
Connector Specifications
● Two 10/100/1000BASE-T network interfaces
Ports (Back Panel)
● One Serial I/O port
● Two USB 2.0 ports
● One VGA video port
● One eSATA port
Electrical Specifications
Powering
100 VAC to 240 VAC 50/60 Hz
Power Consumption
250 W
Electrostatic Shock
No damage from five discharges of 15 KV IEC electrostatic discharge model [150 Pico-Farad
(pF) + 150 ohm] to all exposed connections
● FCC part 15 sub part B class A
RFI/EMI Emission
● EN50083-2
Environmental Specifications
Temperature Range
50º to 95ºF (10º to 35ºC)
Cooling
Self-contained fans provide sufficient cooling to operate in a 19-in. (483 mm) rack without the
need for a 1 RU spacer between units
Storage Temperature
40º to 149ºF (-40º to +65ºC)
Operating Humidity
20% to 80% non-condensing
Mechanical Specifications
● One rack unit
Dimensions (WxHxD)
● 17 in. x 1.68 in. x 15.5 in. (431 mm x 42.6 mm x 393.7 mm)
Data Sheet
Page 3 of 4