Cisco IC3000 Manuale di installazione dell'hardware - Pagina 9
Sfoglia online o scarica il pdf Manuale di installazione dell'hardware per Porta d'ingresso Cisco IC3000. Cisco IC3000 37. Industrial compute gateway
Anche per Cisco IC3000: Documentazione del prodotto (12 pagine)
Stampa la pagina
Preface
WARNING: If the symbol of suitability with an overlaid cross appears above a port, you must not connect
the port to a public network that follows the European Union standards. Connecting the port to this type of
public network can cause severe personal injury or can damage the unit. Statement 1031
WARNING: Connect the unit only to DC power source that complies with the safety extra-low voltage
(SELV) requirements in IEC 60950 based safety standards. Statement 1033
WARNING: For connections outside the building where the equipment is installed, the following ports must
be connected through an approved network termination unit with integral circuit protection: 10/100/1000
Ethernet. Statement 1044
WARNING: When installing or replacing the unit, the ground connection must always be made first and
disconnected last. Statement 1046
WARNING: Do not locate the antenna near overhead power lines or other electric light or power circuits, or
where it can come into contact with such circuits. When installing the antenna, take extreme care not to come
into contact with such circuits, because they may cause serious injury or death. For proper installation and
grounding of the antenna, please refer to national and local codes (for example, U.S.:NFPA 70, National
Electrical Code, Article 810, Canada: Canadian Electrical Code, Section 54). Statement 1052
WARNING: No user-serviceable parts inside. Do not open. Statement 1073
WARNING: Installation of the equipment must comply with local and national electrical codes. Statement
1074
WARNING: Only trained and qualified personnel should be allowed to install, replace, or service this
equipment. Statement 1030
WARNING: Read the installation instructions before connecting the system to the power source. Statement
1004
WARNING: Ultimate disposal of this product should be handled according to all national laws and regulations.
Statement 1040
WARNING: The covers are an integral part of the safety design of the product. Do not operate the unit without
the covers installed. Statement 1077
WARNING: Hot surface. Statement 1079
Related Documentation
• IC3000 product page
https://www.cisco.com/c/en/us/support/routers/3000-series-industrial-compute-gateways/tsd-products-support-series-home.html
• Warranty and EULA Information:
• Cisco Marketplace:
• Cisco Support:
Searching Cisco Documents
To search an HTML document using a web browser, press Ctrl-F (Windows) or Cmd-F (Apple). In most
browsers, the option to search whole words only, invoke case sensitivity, or search forward and backward is
also available.
To search a PDF document in Adobe Reader, use the basic Find toolbar (Ctrl-F) or the Full Reader Search
window (Shift-Ctrl-F). Use the Find toolbar to find words or phrases within a specific document. Use the
https://www.cisco.com/c/en/us/products/warranty-listing.html
www.cisco.com/pcgi-bin/marketplace/welcome.pl
www.cisco.com/cisco/web/support/index.html
Cisco IC3000 Industrial Compute Gateway Hardware Installation Guide
Related Documentation
7