Epson Perfection V200 Photo Elenco delle parti - Pagina 4

Sfoglia online o scarica il pdf Elenco delle parti per Scanner Epson Perfection V200 Photo. Epson Perfection V200 Photo 10. Color image scanner
Anche per Epson Perfection V200 Photo: Opuscolo (2 pagine), Inizia qui (2 pagine), Aggiornamento (1 pagine), Istruzioni importanti per la sicurezza (4 pagine), Manuale d'uso (9 pagine), Inizia qui (2 pagine), Inizia qui (2 pagine)

Epson Perfection V200 Photo

Placing Film or Slides

To scan film strips or slides, you need to remove the document

mat from the scanner cover. This uncovers the transparency

unit window so your scanner can use it to scan your film or

slides.

1. Open the scanner cover and gently slide up the document

mat to remove it.

2. Use a soft microfiber cloth to wipe the transparency unit

window and the document table before placing your film or

slides.

Transparency

unit window

To place film for scanning, see the next section.

To place slides for scanning, see page 5.

4 - Epson Perfection V200 Photo

1. Open the cover of the 35mm film strip holder.

2. Slide your film strip all the way into the film holder with the

shiny base side facing down. Your images and any wording

on the film strip should appear backwards on the side that

faces up. You can scan up to 6 standard 35mm images per

film strip.

Note:

Hold the edge of the film gently when touching the film;

otherwise you may damage the film.

Make sure the white stickers on the back of the film holder and

the areas around them are not scratched, dusty, or covered in

any way. If the areas are obscured, the scanner may have trouble

recognizing your film.

Do not cover the small holes or slots in the film holder.

3. Close the cover and press it down until you hear a click.

Make sure the cover is properly seated and closed all the

way.

7/07