Cisco VG202 Manuale di configurazione del software - Pagina 39
Sfoglia online o scarica il pdf Manuale di configurazione del software per Porta d'ingresso Cisco VG202. Cisco VG202 50. Voice gateways
Anche per Cisco VG202: Manuale di installazione dell'hardware (50 pagine), Manuale (10 pagine), Manuale di installazione dell'hardware (48 pagine), Manuale di avvio rapido (19 pagine)
Stampa la pagina
Chapter 4
Configuring Voice
Three-Party Conferencing
Three-party conferencing provides a three-way conversation between three call parties. The voice
gateways along with CCM support three-party conferencing using Cisco IOS software to perform G.711
(ITU-T standard for audio companding) software mixing for up to three Real-time Transport Protocol
(RTP) streams
To configure three-party conferencing on the voice gateways, use the same commands and configuration
shown in
Call ID
Caller ID transmits a caller's number to the called party's telephone during the ringing signal. To
configure caller ID on the voice gateways, use the following commands.
SUMMARY STEPS
1.
2.
3.
4.
5.
6.
7.
DETAILED STEPS
Command or Action
Step 1
enable
Example:
VG# enable
Step 2
configure terminal
Example:
VG# configure terminal
Step 3
voice-port slot-number/port
Example:
VG(config)# voice-port 0/0
Step 4
caller-id enable [type [1|2]]
Example:
VG(config-voice-port)# caller-id enable type 1
OL-16191-01
"Call Transfer" section on page
enable
configure terminal
voice-port slot-number/port
caller-id enable [type [1|2]]
voice-port slot-number/port
caller-id enable [type [1|2]]
exit
Cisco VG202 and Cisco VG204 Voice Gateways Software Configuration Guide
4-11.
Purpose
Enters privileged EXEC mode.
Enters global configuration mode. You have entered
global configuration mode when the prompt changes to
VG(config)#.
Enters voice-port configuration mode.
Allows the sending or receiving of caller-ID information.
Configuring Calls
4-13