Cisco VG202 Manuale di installazione dell'hardware - Pagina 46

Sfoglia online o scarica il pdf Manuale di installazione dell'hardware per Porta d'ingresso Cisco VG202. Cisco VG202 50. Voice gateways
Anche per Cisco VG202: Manuale di configurazione del software (50 pagine), Manuale (10 pagine), Manuale di installazione dell'hardware (48 pagine), Manuale di avvio rapido (19 pagine)

Stampa la pagina

Cisco VG202 Manuale di installazione dell'hardware

Troubleshooting

Verify the initial configuration. See the

Step 13

for verification procedures.

Manual Configuration

To configure the Cisco VG202 or Cisco VG204 from a console (locally or remotely), see the

Cisco VG202 and Cisco VG204 Voice Gateways Feature Module

For information about obtaining any referenced documentation, see the

Submitting a Service Request" section on page

Verifying and Saving Your Configuration

To verify the configuration and save it in NVRAM so that the configuration remains in effect if the

Cisco VG202 or Cisco VG204 voice gateway is restarted, enter the following commands:

Command

Step 1

VG# show running-config

Step 2

VG# show startup-config

Step 3

VG# copy running-config startup-config

Troubleshooting

This section describes possible mechanical problems and corrective actions.

If there appears to be a malfunction, first check all cables and connections. If these are in order, see

Table 4-1

For problems with the configuration, see the

Module

Cisco VG202 and Cisco VG204 Voice Gateways Hardware Installation Guide

4-6

for specific troubles and solutions.

for configuration instructions.

Chapter 4

Powering On the Cisco VG202 and Cisco VG204 Voice Gateways

"Verifying and Saving Your Configuration" section on page 4-6

xvi.

Purpose

Displays the current operating configuration, including any

changes you have just made.

Displays the configuration currently stored in NVRAM.

Writes the current running configuration to NVRAM, where it

overwrites the startup configuration and becomes the new startup

configuration.

If you reboot the Cisco VG202 or Cisco VG204 voice

Note

gateway or turn off the power before you complete this

step, you lose the configuration.

Cisco VG202 and Cisco VG204 Voice Gateways Feature

for configuration instructions.

"Obtaining Documentation and

OL-15959-01