3Com OfficeConnect WX1200 Manuale di avvio rapido - Pagina 3

Sfoglia online o scarica il pdf Manuale di avvio rapido per Router di rete 3Com OfficeConnect WX1200. 3Com OfficeConnect WX1200 10. Secure converged networks enterprise edition
Anche per 3Com OfficeConnect WX1200: Manuale di avvio rapido (2 pagine), Manuale di avvio rapido (10 pagine), Scheda tecnica (6 pagine), Manuale del prodotto (15 pagine)

3Com OfficeConnect WX1200 Manuale di avvio rapido
3COMWX.mynetwork.com, where the DNS suffix
for mynetwork.com is learned through DHCP. The
WX relays information about WX switches in the
network that contain a Distributed MAP configura-
tion specific to that Distributed MAP.
Preparing Clients
MSS uses 802.1X for access to secure (encrypted)
SSIDs. For a client to access an encrypted SSID,
802.1X must be configured on the client. Depending
on the type of encryption used for the SSID, addi-
tional configuration on the client might be required.
The following sections describe how to configure a
Windows XP (Service Pack 2) client for access to an
unencrypted (clear) or encrypted SSID. The exact pro-
cedure and the options that are supported depend on
the Windows version installed on the client and might
also depend on the wireless adapter card. See the
Wireless LAN Switch and Controller Release Notes for
additional client recommendations and a list of sup-
ported wireless adapters.
To configure a Windows XP SP2 client to access an
SSID and use dynamic WEP encryption:
Access the Network Connections dialog box. (Select
1
Control Panel > Network and Internet Connec-
tions.)
Select Network Connections.
2
Right-click on the wireless network connection and
3
select Properties.
Click the Wireless Networks tab.
4
Click Add to display the Wireless network properties
5
dialog box.
Type the SSID name in the Network name field. (If you
6
are using the SSIDs in this document, type public for
nonsecure access, or corporate for secure access.)
In the Wireless network key group box, select Net-
7
work Authentication type Open.
Select Data encryption type WEP.
8
Select The key is provided for me automatically, if
9
not already selected.
Make sure This is a computer-to-computer (ad
hoc) network is not selected.
Click the Authentication tab.
10
Enable or disable 802.1X:
11
If the SSID is unencrypted, deselect Enable IEEE
802.1X authentication for this network. Go to
step 18.
If the SSID is encrypted, select this option. 802.1X
is required for access to any encrypted SSID.
If you enabled 802.1X, select Protected EAP (PEAP).
12
(If 802.1X is disabled, EAP is not used.)
Leave the Authenticate as computer and Authen-
13
ticate as guest options disabled.
Click Properties.
14
Deselect Validate server certificate.
15
Select Secured password (EAP-MSCHAP v2) as the
16
authentication method.
Click OK to close the Properties dialog for the SSID.
17
Preparing Clients
3