LQ-570/1070
Interface timing
The figure below shows the timing for the parallel interface:
Interface Cards
can use optional interface boards to supplement your printer's
Y
OU
built-in parallel interface.
The Epson interfaces below are compatible with your printer:
! Model Numkr
I C823lOl
Option Specifications
Cut-sheet feeders
The asterisk (') in this section is a substitute for the last digit, which
varies according to country.
.
(14.4 Inches)
377 mm
(14.8 Inches)
367 mm
(14.4 m&es)
Note: Dimensions when mounted on the printer; includes printer
dimensions
Bin capan'ty
Single sheets:
Up to 50 sheets of 82-g/m' (22~lb) paper
Up to 150 sheets of
Envelopes:
Up to 25 (plain bond)
Up to 30 (air mail)
LQ-570/1070-6
Depth
434 mm
444mm
117.1 Inches1
434 mm
1.55 kg
(3.42 lb)
(17.1 Inches)
(17.1 Inches)
609 mm
0.75 kg
(24.0 Inches)
(17.5 Inches)
(1.85 lb)
434 mm
2.15 kg
(24.0 Inches)
(17.1 Inches)
(4.74 lb)
(22-lb) paper
Paper:
(7.17 to 8.50 Inches.)
0.07 to 0.10 mm
64 to 82 g/m'
Paper storage conditions:
Environmental
Temperature:
Humidity (without condensation):
1
Note:
l
conditions.
Envelope printing is only available with the C806381 cut-sheet
l
feeder, at normal operating conditions.
Command Changes from ESC/P
New Commands
The following are new commands that have been added to the
Set page length in defined unit
Select graphics mode
Define unit
Set absolute vertical print position
Print data as characters
Set page format
Assign character table
Set relative vertical print position
Print raster graphics
ESC.
Select font by pitch and point
Set horizontal motion
Deleted Commands
The following commands are not supported on Epson ESC/P 2
printers:
Select vertical tab channel
Select justification
8/20/91
I Envslopes
(6.50 to 9.49 inches)
0.16 to 0.52 mm
(17 to 22 Ibs)
Temperature: 18" to 22°C (64" to 72°F)
Humidity: 40% to 60%
Operation: 5" to 35°C (41' to 95°F)
Storage: -30" to 60°C (-22" to 140°F)
Operation: 15% to 80%
Storage: 5% to 90%
index
,
24-Pin Printers
Stampa la pagina