diLUSSO SO60BPBI Manuale d'installazione e d'uso - Pagina 3

Sfoglia online o scarica il pdf Manuale d'installazione e d'uso per Forno diLUSSO SO60BPBI. diLUSSO SO60BPBI 12. Built-in steam oven

Stampa la pagina

Important Notes

Dear Customer

Thank you for choosing our product. This appliance is easy to use; however please read this handbook carefully

before installing and operating it. Herein, you will find the correct method of installation and tips for best use and

maintenance of the product.

●

This appliance is designed for an adult to use at home. Do not allow children to play with it.

Children need to be supervised when the product is in operation.

●

This product must be connected in accordance with current electrical regulations. A fixed wiring installation

is to be done only by an authorised electrician.

●

Before maintenance or cleaning of the product, disconnect the appliance from the mains and wait for the

oven to cool down first.

●

For any repairs, always contact authorised Customer Service Centre and ask for original spare parts. Repairs

by untrained people may lead to damage and void the warranty.

●

Power Connection:

THE APPLIANCE MUST BE CONNECTED IN ACCORDANCE WITH CURRENT ELECTRICAL RULES AND REGULATIONS.

INSTALLATION IS TO BE DONE ONLY BY AN AUTHORISED ELECTRICIAN.

WARNING: THIS APPLIANCE MUST BE EARTHED

Main connection can also be made by fitting a single phase 10amp switch with a minimum gap between the

contacts of 3mm.

Means for disconnection must be incorporated in the fixed wiring in accordance with the wiring rules.

Before connecting to the mains, make sure that:

●

Use 1.0mm power cable and three-pin socket rate 10A

●

The electric meter, safety valve, feeding line and socket are adequate to withstand the maximum load

required (refer to product data label for maximum load)

●

The supply system is regularly earthed, according to the regulations in force.

●

The isolation switch can easily be reached after the oven is installed.

●

After connection to the mains, check that the supply cable does not overheat.

●

Never use reductions, shunts, adaptors that can cause overheating or burning.

●

The supply cable must be positioned so that it does not exceed 50°C above room temperature at any point

of its length.

The manufacture shall not liable for any direct or indirect damage caused by faulty installation. The installer must

ensure that the product installation and connection complies with the local and general regulation in force.

Please flush the built in water reservoir prior to usage if the steam oven has not been used for more than a

month.

-2-