Motorola GP328 Scheda di riferimento rapido - Pagina 23
Sfoglia online o scarica il pdf Scheda di riferimento rapido per Radio bidirezionale Motorola GP328. Motorola GP328 23. Professional two-way radio
Anche per Motorola GP328: Specifiche (2 pagine), Specifiche tecniche (4 pagine), Manuale operativo (1 pagine), Manuale d'uso (30 pagine)
Stampa la pagina
Sending a New Number (for radios
with keypad only)
You enter the phone number by pressing the
relevant keys on the keypad.
Method
Steps to Take
Enter the phone number by using the
Live Dial
keypad; the radio sends out the numbers
as the keys are pressed.
1. Enter the phone number by using
the keypad; the radio saves the
Buffered
selected numbers in a buffer.
Dial
2. Press and release the PTT; the
radio sends out the numbers in its
buffer.
The Phone Conversation
Once the radio has connected to the intended
party, you can begin the conversation. Even
though this is a phone call, your conversation
mimics a radio call (that is, both parties speak in
turn).
1.
Press and hold the PTT, while talking into the
microphone.
2.
Release the PTT when you Þnish what you
want to say, and wait for the response.
3.
Repeat steps 1 and 2 until the conversation
ends.
NOTE: The radio starts a programmable Time-Out-
Timer the moment both parties stop transmitting
(talking). If the Time-Out-Timer expires, the radio
will end the phone call.
Ending the Phone Call
Just as the radio needs to send the access code
when starting a phone call, the radio needs to
send the deaccess code to end the phone call.
The radio can send the deaccess code in any of
the following ways:
¥ manual, and
¥ automatic.
Check with your dealer for details.
1.
If your radio sends the deaccess code manu-
ally, dial the deaccess code from the keypad.
2.
Press the Phone button to exit phone mode.
NOTE: Radios using the automatic method
will send the deaccess code automati-
cally.
Phone
19
English