Toshiba 22BV500B Manuale d'uso - Pagina 8

Sfoglia online o scarica il pdf Manuale d'uso per TV Toshiba 22BV500B. Toshiba 22BV500B 36. 22" bv series

Stampa la pagina

Connecting an HDMI® or DVI Device to the HDMI

The HDMI input on your television receives digital audio and

uncompressed digital video from an HDMI source device

or uncompressed digital video from a DVI (Digital Visual

Interface) source device.

This input is designed to accept HDCP (High-Bandwidth

Digital-Content Protection) programme material in digital

form from EIA/CEA-861-D–compliant [1] consumer electronic

devices (such as a set-top box or DVD player with HDMI or

DVI output).

NOTE:

•

Some early HDMI equipment may not work properly with

your latest HDMI TV.

•

Supported Audio format: Linear PCM, sampling rate

32/44.1/48kHz.

To Connect an HDMI Device

Connect an HDMI cable (type A connector) to the HDMI

terminal. For proper operation, it is recommended that you

use an HDMI cable with the HDMI Logo (

•

If your HDMI connection is capable of 1080p and/or your

television is capable of refresh rates greater than 50Hz,

you will need a Category 2 cable. Conventional HDMI/DVI

cable may not work properly with this mode.

•

HDMI cable transfers both video and audio. Separate

analogue audio cables are not required (see illustration).

•

To view the HDMI device video, press the

to select HDMI.

00_MB45_[GB]_3910UK_IDTV_NICKEL9_22740W_(IB_INTERNET)_10068436.indd 7

Input

Connect an HDMI-to-DVI adaptor cable (HDMI type A

connector) to the HDMI terminal and audio cables to the PC/

Side AV/YPbPr sockets (see illustration).

•

The recommended HDMI-to-DVI adaptor cable length is

6.6 ft (2m).

•

An HDMI-to-DVI adaptor cable transfers video only.

Separate analogue audio cables are required.

SOURCE button

NOTE:

To ensure that the HDMI or DVI device is reset properly, it is

recommended that you follow these procedures:

•

When turning on your electronic components, turn on the

television ﬁ rst, and then the HDMI or DVI device.

•

When turning off your electronic components, turn off the

HDMI or DVI device ﬁ rst, and then the television.

English - 7 -

To Connect a DVI Device

17.05.2010 16:53:35