Pioneer VSA-805S Manuale di servizio - Pagina 2

Sfoglia online o scarica il pdf Manuale di servizio per Amplificatore Pioneer VSA-805S. Pioneer VSA-805S 34. Av digital-surround amplifier

VSA- 805S

1. DISASSEMBLY

r—— CAUTION !

You will get an electric shock if you touch the Radiator (Heat-sink) when the AC power cord is

connected to the power source. Also, the Electrolytic Capacitor contains a charge even when

the AC power cord is unplugged, so the charge must be removed when the bonnet has been

taken off.

@ Connect the Radiator (top side) and either the Chassis or the Rear panel for 2 to 3 seconds with a Resistor of

more than 5W/10 Q.

@ Connect the +B lead on the J2 and either the Chassis or the Rear panel for 2 to 3 seconds with a Resistor of

more than 5W/10 Q2.

Round Kbob L

.1PS & FUNC ASSY

1. Remove the Bonnet case.

2. Remove the two screws ().

4. Remove the four screws @) holding the PS & FUNC

Remove the screw @).

assy.

_Remove the Round knob L and remove the screw @

between the volume and the front panel.

. Remove the Vol. assy from the PS & FUNC assy.

.Remove

the rear panel, and power

block from the

chassis at the same time, according to the Fig. 1.

PS & FUNC Assy

Screw@

VOL. Assy

Screw @

Screw@

Power Block

Front Panel

Fig. 1

Chassis