Pioneer S-L9-A-LRW Istruzioni per l'uso - Pagina 12
Sfoglia online o scarica il pdf Istruzioni per l'uso per Sistema di altoparlanti Pioneer S-L9-A-LRW. Pioneer S-L9-A-LRW 48. Stereo cd receiver; speaker system; stereo cassette deck
Anche per Pioneer S-L9-A-LRW: Manuale di servizio (3 pagine), Manuale di servizio (3 pagine)
Stampa la pagina
2 Installing and Connecting Up
4
Standard stereo audio
lead (not supplied)
AUX/CD-R IN
L
R
^
STANDBY/ON
DIGITAL
OUT
(OPT.)
Optical digital audio
lead (not supplied)
12
4 Plug the supplied FM antenna into the FM antenna terminal.
For best results, extend the FM antenna fully and fix to a wall or door frame. Don't
drape loosely or leave it coiled up. The supplied FM antenna is a simple means of
receiving FM stations; using a dedicated, outdoor FM antenna will usually give you
better reception and sound quality. See below for connection details.
Note: The signal earth (H) is designed to reduce noise that occurs when an
antenna is connected. It is not an electrical safety earth.
Connecting external antennas
Indoor type
External AM antenna
Use 5–6 meters of vinyl-insulated wire
and set up either indoors or outdoors.
Leave the AM loop antenna connected.
Connecting other components
The CD receiver has analog audio inputs and an optical digital output for connecting
up other components. Possible uses for the analog inputs include sound from a VCR
L
R
Playback
)
PHONES
Recording
an optical digital input, such as a DAT deck, CD-R or MD recorder, you can connect it
to the CD receiver's optical digital out for digital recording of CDs. If you didn't get an
optical cable with your digital recorder, you can buy one from any good audio dealer.
Just above and to the left of the auxiliary inputs there is a socket labelled
FROM MODEL PDR-L77. This is for use with the optional CD-recorder only—
see the CD-R manual for more information on this.
Plugging in to the mains
After making sure that the system components and speakers are all connected
properly, plug in the power cable to the back of the CD receiver, and the other end to a
mains power outlet.
If you have the optional MD recorder, this has a separate mains lead which must also
be connected. In order to use the MD recorder, you must have both units plugged in.
Outdoor type
External FM antenna
Use 75 coaxial cable with a PAL-type
plug connector to hook up an external
FM antenna.
or satellite receiver, a file-type ('jukebox')
CD player, or turntable (with suitable
OUT (PLAY)
L
phono amplifier). Use a standard stereo
L
audio cable (with RCA/phono plugs on
R
R
either end) to connect the
(auxiliary input) on the CD receiver to the
AUDIO OUT
component. Be sure to match the colour-
DIGITAL
coded plugs and sockets at both ends for
IN
(OPT.)
best results.
If you have a digital recorder equipped with
/
-
AUX
CD
R IN
sockets on the other