Pioneer PDP-503MXE Manuale tecnico - Pagina 13

Sfoglia online o scarica il pdf Manuale tecnico per Monitor Pioneer PDP-503MXE. Pioneer PDP-503MXE 25. Plasma display monitor

Stampa la pagina

INPUT2 (BNC jacks)

For connection of components that have RGB or

component

output jacks such as a personal

computer, DVD player, or external RGB decoder.

Synchronizing signal impedance selector switch

Depending on the connections made at INPUT2, it

may be necessary to set this switch to match the

output impedance of the connected component's

synchronization signal.

When the output impedance of the component's

synchronization signal is below 75 Ω, set this switch

to the 75 Ω position.

AUDIO INPUT (Stereo mini jack)

Use to obtain sound when INPUT1, INPUT2 or

INPUT5

is selected.

Connect this jack to the audio output connector of the

device connected to the plasma display's INPUT1 or

INPUT2, or to the audio output connector of the

device connected to the video card's INPUT5

AUDIO OUTPUT (Stereo mini jack)

Use to output the audio of the selected source

component connected to the main unit to an AV

amplifier or similar component.

MAIN POWER switch

Use to switch the main power or the main unit on

and off.

AC INLET

A power cable is furnished with the main unit:

connect one end of the power cable to this

connector and the other end to a standard AC

power source.

SPEAKER (L) terminal

For connection of an external left speaker. Connect

a speaker that has an impedance of 8 -16 Ω.

Video Card <PDA-5002> Section #

INPUT5 (DVI-D jack)

Use to connect a computer.

Note: This unit does not support the display of

copyguard-protected video signals.

AUDIO INPUT3 (RCA Pin jacks)

Use to obtain sound when INPUT3 is selected.

Connect these jacks to the audio output connectors

of components connected to the video card's

INPUT3.

Note: The left audio channel (L) jack is not

compatible with monaural input sources.

INPUT3 (S-video jack)

For connection of components that have an S-video

output jack such as a video deck, video camera,

laser disc player, or DVD player.

AUDIO INPUT4 (RCA Pin jacks)

Use to obtain sound when INPUT4 is selected.

Connect these jacks to the audio output connectors

of components connected to the video card's

INPUT4.

Note: The left audio channel (L) jack is not

compatible with monaural input sources.

INPUT4 (BNC jack)

For connection of components that have a

composite video output jack such as a video deck,

video camera, laser disc player, or DVD player.

OUTPUT (INPUT4) (BNC jack)

Use the OUTPUT (INPUT4) jack to output the video

signal to an external monitor or other component.

Note: The video signal will not be output from the

OUTPUT (INPUT4) jack when the main power of

this display is off or in standby mode.

Controls and Connectors