Whirlpool 3ED27DQ Manuale d'uso e manutenzione - Pagina 16

Sfoglia online o scarica il pdf Manuale d'uso e manutenzione per Frigorifero Whirlpool 3ED27DQ. Whirlpool 3ED27DQ 24. No-frost refrigerator-freezers with thirst crusher
Anche per Whirlpool 3ED27DQ: Manuale d'uso e manutenzione (30 pagine), Manuale d'uso e manutenzione (30 pagine)

Stampa la pagina
Bemoving
the base gr
To remove the grille:
1.
Open both doors.
2. Pull base grille forward to release the support
tabs from the metal clips.
3. Do not remove Tech Sheet fastened behind
the grille.
To replace the grille:
1. Line up grille support tabs with metal clips.
2. Push firmly to snap into place.
3. Close the doors.
See cleaning instructions for defrost pan and
condenser coils on page 19.
Ale
Condenser coils
Changing
the light
bulbs
Electrical
Shock Hazard
Before removing a light bulb, either unplug
the refrigerator or disconnect the electricity
leading to it at the main power supply.
Failure to do so could result in personal
injury.
To change refrigerator
light:
1. Disconnect refrigerator from power supply.
2. Reach behind the Control Console to remove
bulb.
3. Replace bulb with a 40-watt appliance bulb.
4. Reconnect refrigerator to power supply.
To change crisper
light:
1. Disconnect refrigerator from power supply.
2. Pull top of light shield forward until it snaps
free.
3. Lower light shield to clear bottom supports.
4. Pull light shield straight out to remove.
5. Replace bulb with a 40-watt appliance bulb.
6. Replace light shield in reverse order.
7. Reconnect refrigerator to power supply.
To change
light below ice bin:
1. Disconnect refrigerator from power supply.
2. Push in sides of light shield until it snaps free
3. Replace bulb with a 40-watt appliance bulb.
4. Replace light shield.
5. Reconnect refrigerator to power supply.
1- '3
/ -=&c&j=-
E
\