Xerox Phaser 750DX Manuale di servizio - Pagina 21
Sfoglia online o scarica il pdf Manuale di servizio per Accessori per stampanti Xerox Phaser 750DX. Xerox Phaser 750DX 40. Digital color printer / copier
Anche per Xerox Phaser 750DX: Specifiche tecniche (2 pagine), Opuscolo e specifiche (4 pagine), Manuale di riferimento (8 pagine), Manuale (9 pagine)
Stampa la pagina
Status
Code
Tray Paper
The control logic has sensed that the the paper size is not being detected correctly.
Size
Initial action:
Sensing for
Go to the Paper Tray which was selected on the Control Panel and verify that the Paper Size Indicator is set
Tray 1, Tray
to the correct paper size that is loaded in the Paper Tray.
2, Tray 3,
Tray 4, or
Go to the Paper Tray which was selected on the Control Panel and verify that the paper is loaded correctly.
the Bypass
NOTE : Check for obvious damage, missing or broken Drive Motor gear assemblies and drive belts. These
Tray
items may cause a sensor failure to be displayed as an operator error message.
If the problem still exists:
Place a service call.
08-105,
The control logic sensed a timing problem from the Feed Out sensor for Tray 1 (08-105), Tray 2 (08-110), Tray 3 (08-
110, 115,
115) or Tray 4 (08-120).
120
Initial action:
For the appropriate tray, check the Tray Feed Out Sensor actuator for freedom of movement and proper
installation.
Check for proper installation of the appropriate Paper Guide.
For the appropriate tray, check the Feed Sensor, Nudger, Retard and Feed Rolls shaft, for cleanliness,
damage and excessive wear.
Clean the Feed, Retard and Nudger Rolls with a damp cloth (water) (REP 5.22) (REP 5.24).
Fan the paper or replace the paper with a new ream of paper.
If the problem still exists:
Place a service call.
5750 DocuCare Service Manual
Description/Direction
5/98
2-21
Fault Code Procedures