Yamaha AW2400 Manuale - Pagina 25

Sfoglia online o scarica il pdf Manuale per Strumento musicale Yamaha AW2400. Yamaha AW2400 30. Professional audio workstation
Anche per Yamaha AW2400: Opuscolo e specifiche (6 pagine)

Stampa la pagina

While playing the song, cursor to the send knob of the track that you want

to send to the first effects unit, and then use the jog wheel to adjust the

send level for each of the tracks.

This is for the first effects processor of the AW2400. To use the next three effects

processors press the [EFFECT SEL] key until the desired effects processor is displayed.

Keep in mind that the AW2400 has four internal effects processor. It is possible to send as many

tracks as you want to any of the effects processors.

Recording the Stereo Track

After you have recorded all of the tracks and adjusted the EQ, dynamics

processors, and added effects, you will need to record your final mix onto the

Stereo Track of the AW2400. The Stereo Track of the AW2400 is in addition to

the regular record tracks of the AW2400. If you do not record your mix onto the

Stereo Track you will not be able to create an audio CD.

Note: If the song's bit rate is 24bit the [DITHER] button must be turned on to make a CD that

plays at 44.1 kHz and16bit for normal playback on standard CD players.